Known issues with the December 2015 Public Stable-Release

[Blacky]

Currently known issues and possible workarounds for the December 2015 Public Stable-Release of the EFILive Software and Firmware

Download the public stable-release here: https://forum.efilive.com/showthread...Stable-Release

Public pre-release software versions:

• Software: V7.5.7.299
• Software: V8.2.2.290
• FlashScan/AutoCal firmware: V2.07.95

---

Issue 1:
If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.
Workaround:
None.
It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available.

---

[dieselmd]

Seems that T43 os 24256125 is missing the adaptive volume and pressure presets. Trying to tune one now and don't have access to them. Also can not change os in t43 anymore apparently.

[Tre-Cool]

Seems that T43 os 24256125 is missing the adaptive volume and pressure presets. Trying to tune one now and don't have access to them. Also can not change os in t43 anymore apparently.

I would appreciate these ones too myself. This is the 2011 model year. noticed they are mapped in the 2013 ones though.

To give efilive a financial incentive i purchased the t43 stream :-)

[GMPX]

Seems that T43 os 24256125 is missing the adaptive volume and pressure presets. Trying to tune one now and don't have access to them. Also can not change os in t43 anymore apparently.

I just checked and I don't think that OS ever had those preset tables in there. Same applies for all OS's after this one (essentially 2011+), GM changed the strategy (going off memory here) and we never figured it out.
Changing OS's must be done via V8, I don't think V7.5 could ever Full Flash the T43.
We will take at look at those tables again but it probably won't be until next year.

[Tre-Cool]

I just checked and I don't think that OS ever had those preset tables in there. Same applies for all OS's after this one (essentially 2011+), GM changed the strategy (going off memory here) and we never figured it out.
Changing OS's must be done via V8, I don't think V7.5 could ever Full Flash the T43.
We will take at look at those tables again but it probably won't be until next year.

I'm you you on this one. I dont think that os has ever had them mapped.

Im ok now. i just changed what i needed with hpt and use it as base for future vehicles with the same trans os.

[dieselmd]

That os had these tables previously. Last update is when they disappeared.

[cindy@efilive]

That os had these tables previously. Last update is when they disappeared.

What software did you update from? I've reinstalled a range of software releases between March and December and all calz files have the same generation date.

Cheers
Cindy

[dieselmd]

I'm not 100% sure Cindy. I would think it was a pre release from mid year'ish. Looks like last one I did with this os was around the end of October and I had the tables then.

[Chuck CoW]

I see the 2016 T87 OS I've been waiting for...... VERY HAPPY NOW!!!!

Thank you!
Chuck CoW

[dieselmd]

They were definitely there. I tuned one with that os just a couple months back that had to have those tables. All the other os', even newer ones, have them as well.

I have tried to full flash in v8 and it tells me that there is an os mismatch. Never used to do that before.