Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: V2 Licensing Questions

  1. #1
    Junior Member clubby5000i's Avatar
    Join Date
    Jul 2007
    Posts
    12

    Default V2 Licensing Questions

    Hi all,
    if I reorder from the store, I notice it retains the old Authorisation code from the previous purchase. I normally change this the new code, but do I have to do that? I don;t want to forget and screw up a purchase.

    Also, if I purchase a stream license (E38 or LS1B), am I still limited to 220 VIN's in the V2 in total?

    Thanks in advance

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    You should generate a new auth code each time you order.
    Once you have a stream licence then any subsequent ECMs that use the stream license do not use a VIN slot and are not counted in the 221 limit.
    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Junior Member clubby5000i's Avatar
    Join Date
    Jul 2007
    Posts
    12

    Default

    Awesome! Thanks Paul. efiLive has awesome support and response times

  4. #4
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,760

    Default

    Especially when Paul is 'supposed' to be on holidays at the moment
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  5. #5
    Junior Member clubby5000i's Avatar
    Join Date
    Jul 2007
    Posts
    12

    Default


  6. #6
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    613

    Default

    What should i do when i reach the limit of 220 Licenses ?
    I'm @215 now !!
    EFILive Tuner

  7. #7
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,259

    Default

    Buy another V2 and load it up with streams !!!!
    www.ridgerunnerdieselperformance.com

    tony@ridgerunnerdieselperformance.com

    Tuner of many, many Duramax and Cummins Diesels.


  8. #8
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,795

    Default

    Either purchase streams for the supported controllers or purchase another V2.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, starting the mods
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  9. #9
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by wesam View Post
    What should i do when i reach the limit of 220 Licenses ?
    I'm @215 now !!
    There is a discount when purchasing a replacement FlashScan if/when you run out of VIN slots. Contact sales@efilive.com for more info on the discount and how to obtain it. If/when you do order a replacement make sure you specify your current V2 license number. The replacement V2 will be set up with the same license number before it is shipped to you.

    Regards
    Paul
    Before asking for help, please read this.

  10. #10
    New Member
    Join Date
    Sep 2017
    Posts
    1

    Default

    As a efilive newbe and getting ready to buy a GM V2, will I be able to pull in a base config/tune and use it to learn the software without burning one of the VIN as long as I don't write it back to the ECM? I just want to learn where everything is on the screens/pages. I have done some tuning in the past with other software but not the efilive.

    Regards Don...

    1952 Dodge Pilot House Gen III V8
    1949 Chevy Panel Van Gen III V8

Page 1 of 2 12 LastLast

Similar Threads

  1. V2 Licensing between two different V2's?
    By dave w in forum FlashScan V2
    Replies: 14
    Last Post: September 30th, 2013, 09:44 AM
  2. Licensing
    By kistlerjm9 in forum Gen III V8 Specific
    Replies: 0
    Last Post: August 5th, 2009, 11:13 AM
  3. Licensing?
    By Mort in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: August 3rd, 2009, 02:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •