Results 1 to 3 of 3

Thread: scanning 97 Blazer & 03 Monte

  1. #1
    Junior Member billiardcue's Avatar
    Join Date
    Jan 2005
    Posts
    30

    Default scanning 97 Blazer & 03 Monte

    Can I use my EFILive to scan my 97 Blazer 4.3 and/or my 03 Monte Carlo?
    Dick Abbott

  2. #2
    EFILive Reseller kbracing96's Avatar
    Join Date
    Sep 2005
    Posts
    584

    Default

    Plug it in and find out. Can't hurt anything. My guess is it will read the genaric GM PIDS, but that's it.
    01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC

    Custom KBracing front mounted, BW S480, intercooled turbo


  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    What KB said, plug it in and see, it probably will work (97 is OBD-2);

    on my Mrs' 2002 3.4L V6 it reads generic and enhanced PID's;

    You may need to set the scan tool log mode to Generic or Dynamic ("Edit->Properties->Logging->Scan Mode").

Similar Threads

  1. Does V2 support a 1997 4.3L Blazer?
    By 2002_z28_six_speed in forum FlashScan V2
    Replies: 2
    Last Post: July 2nd, 2008, 05:12 PM
  2. '07 Monte Carlo SS
    By Boost in forum Gen IV V8 Specific
    Replies: 2
    Last Post: June 15th, 2007, 11:33 AM
  3. injector flow rate on trail blazer
    By minytrker in forum Gen IV V8 Specific
    Replies: 1
    Last Post: May 7th, 2007, 03:35 PM
  4. 2001 4.3 blazer tune?
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: May 7th, 2006, 02:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •