Having acouple issuse
First...I have searched and tried. Have updated the UBS drive. But the V2 will on connect so I can update my firmware. Next I can not get it into dead-poll. Have held the Ctrl button down. When I pull up the EFI Live Control Panel...in the USB tab. It shows the UBS connected but not the V2. In the firmware tab it says the V2 is unresponsive. I bought this unit used. Thanks for any help
2008 GMC Sierra 3500
46" Michelin XL
2.5 Rockwells, 4 link and Coilovers
Did you try a different USB cable?
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
I just did....same thing.
2008 GMC Sierra 3500
46" Michelin XL
2.5 Rockwells, 4 link and Coilovers
What version of Windows are you running and are you connecting to a USB 3 port?
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
Running windows 7 and yeah I do have it in a USB 3.0
2008 GMC Sierra 3500
46" Michelin XL
2.5 Rockwells, 4 link and Coilovers
Try a USB 2 port if you have one because the USB 3 ports are problematic for the AutoCal's and V2's. If not look in your computers BIOS for a setting to make the USB ports a version 2 instead of 3 (disabled xHCI interface under the USB configuration).
You can also try loading EFI Live on another older computer to see if the V2 will connect.
2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
2017 Corvette 3LZ Z06 M7 with Z07 Package
More info: Please-Read-Windows-8-Users-%28USB3-xHCI%29
My year old Toshiba laptop has 2 USB 3.0 ports and 2 USB 2.0 ports, the tab inside the port on the computer is blue for the 3.0 ports and the 2.0 are black may want to see if you have both and just switch to the 2.0 port...
http://superuser.com/questions/33188...s-in-my-laptop
Last edited by COSMOS; March 2nd, 2016 at 04:00 AM.
Well I don't know what I did different. I got it in deadpoll and did the EFI Live Recovery (like Ive done a dozen times). Then was able to upgrade the boot block and firmware.
2008 GMC Sierra 3500
46" Michelin XL
2.5 Rockwells, 4 link and Coilovers
Why are you needing to put your V2 into dead poll mode so many times...?
Posting Permissions
Reply With Quote