Results 1 to 3 of 3

Thread: EGT Sensor Codes

  1. #1
    Senior Member
    Join Date
    Jan 2016
    Posts
    118

    Default EGT Sensor Codes

    Yesterday I was sitting in the drive through and I got these codes.

    Is it normal to turn off these codes with efi or are they something I should be concerned with? My actual EGT's and coolant temp seemed normal to me. I reset the codes and they have not came back yet.

    P0546 - exhaust Gas Temperature Sensor Circuit High - Bank 1 Sensor 1
    P2033 - exhaust Gas Temperature Sensor Circuit High - Bank 1 Sensor 2
    P242D - exhaust Gas Temperature Sensor Circuit High - Bank 1 Sensor 3
    P0480 - cooling Fan 1 Control Circuit/open

  2. #2
    Senior Member
    Join Date
    Jan 2016
    Posts
    118

    Default

    anyone?

  3. #3
    Lifetime Member Road's Avatar
    Join Date
    Feb 2015
    Posts
    336

    Default

    No don't turn them off. Fix the problem if it reoccurs. Most likely something all those sensors share like a ground. Being they are high voltage codes...

Similar Threads

  1. Which EGT sensor is best for use with FS
    By Gelf VXR in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: July 9th, 2012, 09:34 PM
  2. Either P0602 or speed sensor codes
    By dansdieselp in forum Cummins 5.9L
    Replies: 4
    Last Post: December 26th, 2011, 11:17 AM
  3. Constant 02 sensor codes
    By RevGTO in forum Gen III V8 Specific
    Replies: 26
    Last Post: June 7th, 2009, 11:07 AM
  4. Egt's
    By 1hotduramax in forum Duramax LB7
    Replies: 5
    Last Post: December 16th, 2008, 01:33 AM
  5. Egt
    By Rico in forum Petrol / Gas
    Replies: 3
    Last Post: July 9th, 2006, 05:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •