Is there anyway we can get the Cooling Fan Airflow tables added for the E67? There are 6 tables (2 each for low, mid and high) that should be under Idle > Correction.
Is there anyway we can get the Cooling Fan Airflow tables added for the E67? There are 6 tables (2 each for low, mid and high) that should be under Idle > Correction.
Did you add E-Fans to a vehicle that never originally had them ?
Post your tune - I can probably populate those parameters for you.
It's actually for 2 separate E67 cars; 13 ZL1 and 09 CTS-V. Both come equipped with e fans from the factory. I added the operating patch to control the fans at lower ECT and was looking for some help with idle airflow like the older LS1's had. I noticed the "other guys" give access to these parameters and was hoping for the same.
OK ... both of those tunes have those parameters populated ... but they are a global adder (single value) for airflow, not a table referenced to ECT.
Not sure what issues you are having. You could try adjusting B1602, in the 154F and 176F cells. You could also adjust B1829, especially if the engine or supercharger has been modified.