Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 51

Thread: Unofficial E47 (LUZ) Full Tuning Support

  1. #21
    New Member
    Join Date
    Dec 2014
    Posts
    4

    Default

    Are you going to release your final version cax file on GitHub?

  2. #22
    Senior Member
    Join Date
    Dec 2015
    Posts
    126

    Default

    The post stuff? Not sure. There is no real way to see if they work. There is no PID which will tell you how much each injection gives.... Because grr Bosch. On the plus side, they should *work*.

  3. #23
    New Member
    Join Date
    Dec 2014
    Posts
    4

    Default

    easy to calculate by total injection mm3 on stock, then on tuned while engine cold then later on warm.

    maybe 5.24 mm3 on idle stock
    maybe 4.24 mm3 on idle tuned
    equates to 1 mm3 reduction total

    All this for Post1 injections while engine cold and warming up.
    But iam not sure if this works, just talking out of my head
    Last edited by KoTaS; June 4th, 2016 at 10:23 AM.

  4. #24
    Senior Member
    Join Date
    Dec 2015
    Posts
    126

    Default

    Then it'll need more fuel to maintain the same conditions... You may not see any change at all other than a bit more noise.

  5. #25
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by Snipesy View Post
    Because grr Bosch. On the plus side, they should *work*.
    Lines often used around here too when dealing with Bosch
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #26
    Senior Member
    Join Date
    Dec 2015
    Posts
    126

    Default

    Quote Originally Posted by GMPX View Post
    Lines often used around here too when dealing with Bosch
    Ross, I have a question for you.

    So I want to make the cax have the fancy giant DTC tables that you make...

    For example I have this.

    Code:
    [B9575]
    DESC.001 = Test Table
    VIEW = 4 "Test Table" "Diagnostic DTCs" "DTC Type Table" 1 4 0 0
    ADDR = "392C0A,392950,39294E,39294D,392BA6,392B8E,3929F2,3929F1,392BD4,3929CB,3929CA,392848,39283B,392BBA,392960,39295F,392BDF,392BDE,39295C,392BC5,3929CD,3929CC,392BDD,392BDC,392C11,392B9D,3928DC,392BA7,392B9E,3929A4,3929A3,3929C7,3929C6,3928F3,3928F2,392B87,392B23,392955,392954,392A8A,3927C2,3927C1,392942,392941,392BA8,3929AE,3929AD,3928B7,3928BB,3928BA,3928BE,3928B8,3928BC,3928B9,3928BD,392B20,392A70,392A73,392A71,392A72,392803,392929,39292C,39292A,392B84,3927C0,3927BF,39292B,392802,3928B3,3928B6,3928B4,3928B5,392BD0,3929DD,3929DB,392C63,392861,392860,3929D9,392C1A,392C16,392C19,392C17,392C18,392A3D,392C0C,392C0B,392C09,392C08,392946,392945,392BDB,39278E,39278A,392BE6,392916,392915,3929CF,3929CE,392C5E,3929D1,3929D0,3928CF,392C0E,39293D,39293C,392BAD,392BF1,392910,39290E,392BAB,3927EF,3927EE,392B5B,392994,392993,3928,3928DF,3928F8,3928FA,3928F9,3929D5,3929D4,392A89,392A88,3928EE,3928ED,3927A1,39279E,39279F,392793,392AD9,392B82,3928F0,3928EF,392C20,392B5E,392BB3,392BB4,3929C1,3929C4,3929C3,392C2C,3.928E+12,3.928E+11,3929A9,3929AC,3929AB,392BAE,392B58,392855,392BA3,39280000,3928000,392872,392BB5,392B8F,392856,392873,392874,392875,392876,3927C3,392937,392857,3927A3,39298D,39298F,39298E,3927AB,392B27,392A3F,392A40,392C5D,3929FF,392BD6,392A05,3929FA,3929F8,392AAD,392C5B,392B52,392A90,392A93,392ABA,392ABB,392AA1,392AA0,3928C3,3928CB,3928CC,3929DF,392BB1,3929DE,3929DC,392BE7,392BEA,392BE8,392BE9,39299A,392B95,392B9F,392A20,392A1F,392B92,392912,392B80,392B81,392911,39290F,39290C,3927B7,3927B8,392BB2,392C4A,392B5F,3927A2,392884,392B8D,392B5A,39287B,392890,392B59,392894,392892,392893,3928D1,392BD1,392A22,392BD2,392A21,3929D3,3929D2,3927CA,392852,392BC2,392BC3,3929F9,3929F7,392A01,3929B6,3929B4,392ABD,392BC6,392A0B,392BC9,392BE3,392BE4,392BC7,3928D9,3929FD,392A03,392AC1,392A06,392A04,392885,392886,392887,392888,392889,39288A,39288B,39288C,39288D,392C60,392C62,39284E,392BAC,392AB2,3929B1,3929AF,3929B2,3929B0,3929C5,392A67,392A68,392ACC,392C5A,392853,392BC0,392854,392BC1,392ACB,392B98,3927FA,3927F9,392B9A,392AA3,39288E,39288F,392868,392869,392AC9,392ACA,392925,392924,39294B,39294A,39294C,392BBD,392997,392999,392998,392B93,39299E,39299D,392BD9,392B9B,392AB9,3927FD,3927FC,392B9C,392AA9,392A9C,392A4A,392811,392BE5,3929D7,3929D6,392BB6,3929A8,3929A7,392BFC,3928D2,392BE0,39290A,392909,39280A,3928D5,3928D7,392BFD,392BEC,392C48,392BED,392819,392C49,392818,392C44,39281C,392BEE,392BEB,3928EC,392BA5,392AC2,392BB0,392C10,3929F4,3929F3,392863,392864,39291B,392C59,39295B,39295A,392939,39293B,39293A,392B2A,392B2D,392B2B,392B2C,392951,392ABF,3927F5,3927F4,3927EA,392B97,3927D2,392BB8,3927CF,39270,3927D0,392BB9,392BBB,392BB7" 0 8 UNM 0
    SI_SLOT = Number 1 0 0 0 256 0 256
    SI_ROW = Stuff "P0016,P0030,P0031,P0032,P003A,P0045,P0047,P0048,P0053,P007C,P007D,P0087,P0088,P0090,P0091,P0092,P0097,P0098,P00C9,P00CA,P00EA,P00EB,P00F4,P00F5,P00F6,P0101,P0102,P0103,P0106,P0107,P0108,P0112,P0113,P0117,P0118,P011B,P0128,P0131,P0132,P0133,P0171,P0172,P0182,P0183,P0191,P0192,P0193,P01CB,P01CC,P01CD,P01CE,P01CF,P01D0,P01D1,P01D2,P01F0,P0201,P0202,P0203,P0204,P0234,P0263,P0266,P0269,P026A,P026C,P026D,P0272,P0299,P02CD,P02CF,P02D1,P02D3,P02E0,P02E2,P02E3,P02E7,P02E8,P02E9,P02EB,P0300,P0301,P0302,P0303,P0304,P0315,P0335,P0336,P0340,P0341,P037A,P037B,P0381,P0401,P0402,P0403,P0405,P0406,P040C,P040D,P040F,P041C,P041D,P0420,P0461,P0462,P0463,P046C,P0480,P0489,P0490,P049D,P0506,P0507,P0513,P0522,P0523,P0532,P0533,P053A,P053B,P053C,P0545,P0546,P054E,P054F,P0562,P0563,P0564,P0567,P0568,P0571,P0575,P057B,P057C,P057D,P0601,P0602,P0606,P060B,P0615,P0616,P0617,P061C,P0621,P0622,P0627,P0628,P0629,P062F,P0633,P0641,P0645,P0646,P0647,P064C,P064D,P0650,P0651,P0671,P0672,P0673,P0674,P0691,P0692,P0697,P069E,P06DA,P06DB,P06DC,P0700,P0703,P0851,P0852,P0856,P1043,P1044,P1046,P1048,P1049,P1089,P10CF,P10D0,P11A6,P11A9,P11CB,P11CC,P11D3,P11D4,P11D7,P11DB,P11DC,P122C,P122D,P122E,P122F,P1248,P1249,P124A,P124B,P125A,P125B,P128E,P12B0,P12B1,P1400,P1407,P140B,P140C,P140D,P140E,P140F,P144E,P144F,P1472,P147F,P150C,P155A,P161A,P162B,P1631,P163C,P163D,P1649,P167C,P16AD,P16AE,P2002,P2008,P2009,P200A,P2010,P2032,P2033,P203B,P203C,P203D,P2047,P2048,P2049,P204B,P204C,P204D,P204F,P205B,P205C,P205D,P2080,P2084,P208A,P208B,P208D,P20A0,P20A1,P20A2,P20A3,P20B9,P20BB,P20BC,P20BD,P20BF,P20C0,P20C1,P20C3,P20C4,P20E2,P20E4,P20E8,P20E9,P20EE,P2122,P2123,P2127,P2128,P2138,P2146,P2149,P214F,P2199,P21AA,P21AB,P21AF,P21B0,P21DD,P2200,P2202,P2203,P2205,P2209,P220A,P220B,P221C,P221D,P221E,P221F,P2228,P2229,P2237,P2243,P2251,P2263,P227B,P227C,P227D,P2294,P2295,P2296,P2297,P229E,P229F,P22A0,P22A1,P22A3,P22A7,P22FA,P22FE,P2428,P242B,P242C,P242D,P2453,P2454,P2455,P2457,P2459,P245A,P245C,P245D,P2463,P249D,P249E,P24A5,P24AE,P24AF,P24B1,P24B3,P24B4,P24B6,P24B7,P24C6,P24C7,P24D0,P2500,P2501,P2505,P2510,P2544,P2564,P2565,P2598,P2599,P25BD,P262B,P263A,P263B,P2687,P2688,P2689,P268C,P268D,P268E,P268F,P2A00,P2BAA,U0073,U0074,U0101,U0106,U0109,U010E,U0121,U0140,U0198,U029D,U029E,U02A3"
    But the issue is A. It gives unrecognized PCM error, and B. The values aren't right cause they just start from 392C0A, the first address. The good news is it does fill in the descriptions for the codes, and loads about a million times quicker on my laptop.

    Care to throw me a bone here? It would work if they were all in a line, and I could just use one address, but you know that won't work here without lots of empty tables.

  7. #27
    Junior Member
    Join Date
    Apr 2015
    Posts
    41

    Default

    ACtually have the same issue on another controller. Trying to properly display/edit a DTC table and make it look decent. A bit tricky via cax :P

  8. #28
    Junior Member
    Join Date
    Nov 2013
    Posts
    38

    Default

    So if we have 126589.bin and 12662377.bin how do we open them. do we need to combine them and import it to an efi live? i thought efi could handle raw bins. I imported your cax files and it wont open the raw binaries
    Calibrator @ The Roadster Shop
    www.roadstershop.com

  9. #29
    Senior Member
    Join Date
    Dec 2015
    Posts
    126

    Default

    Don't combine them. Try opening them with the V8 tool, if that doesn't recongzie eitheir then there's something wrong with the bins. If it does, you didn't install the .cax files correctly.

  10. #30
    Junior Member
    Join Date
    Nov 2013
    Posts
    38

    Default

    Quote Originally Posted by Snipesy View Post
    Don't combine them. Try opening them with the V8 tool, if that doesn't recongzie eitheir then there's something wrong with the bins. If it does, you didn't install the .cax files correctly.

    ahh i was opening with the 7.5 editor; i'm updating it now
    Calibrator @ The Roadster Shop
    www.roadstershop.com

Page 3 of 6 FirstFirst 12345 ... LastLast

Similar Threads

  1. E47 Cruze diesel dyno runs
    By cindy@efilive in forum E47 LUZ 2.0L (Family-B) Diesel
    Replies: 4
    Last Post: January 19th, 2014, 12:21 AM
  2. full BBL support for newer controllers?
    By Boost in forum Black Box Logging
    Replies: 8
    Last Post: May 27th, 2013, 09:30 PM
  3. E-ROD Tuning Support
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 28
    Last Post: March 17th, 2011, 12:21 PM
  4. 4.2L I6 LL8 full OS support when??
    By ScarabEpic22 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: September 18th, 2006, 11:30 AM
  5. Can you help implement 98 Tuning support?
    By Blacky in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: February 22nd, 2005, 09:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •