Hey guys, just wanna see if someone could help out here.
Gonna start tuning soon and was hoping, since there's a LOT of turbo trucks out there, if someone would be willing to share their tune file so I can hit the ground with something at least somewhat close to where I need to be. I'd be willing to compensate for the help.
Ofcourse every kit is different, etc. but a tune with a starting point would greatly help with the VE stuff. Using a 7875 ON3 turbo on a flipped manifold kit with a Tick stage 2 turbo cam in a low comp 5.3 with some mild headwork/4L80E and a 2.5bar sensor. Hoping to settle at about 10-12 psi .. for now.
Thanks in Advance!