So this winter I installed a new turbo cam in the car(Isky 3x12). I have tried to follow the idle tips and tricks sticky but its just not seeming to work. Are some of the pids not able to be chosen if its OLSD. What i am having an issue with is the car starts ok cold it stumbles a little bit then idles fine. Once you drive it and get it warmed up it fires up stumbles then dies you crank it up again and it fires right up and stays running. Also once warm it kind of surges around wants to die say when you pull into a parking lot and switch drive to reverse or vice versa. Any tips would help out greatly. I've searched this sight all over to find the problem i am having and nothing comes up. I am attaching the tune as wellrambler after dyno 7 third gear.ctz