Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: latest trailblazer year using E67 serial data and correct signals for cruise control

  1. #11
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    Quote Originally Posted by DURAtotheMAX View Post
    That yellow/black wire in C152 is a high-resolution 128,000 pulse-per-mile signal that goes from the ECM to the ABS module...since the ABS module is not wired directly to the rear wheels or output speed sensor...it gets its rear wheel speed from the output on the ECM. So that yellow/black wire will have to be hooked up to the 128k PPM pin on the E67 for ABS to work.
    i did wired it, but i cant confirm that it does have the signal, cause on the 08 and 09 trailblazer ss that pin isnt used. ill have to check on that... or does the ecm does outputs the signal without need to tune or something?

  2. #12
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    If the PCM doesnt output the 128,000ppm signal for my ABS to work, can i use a DRAC module and use the 128000 ppm output from it?

  3. #13
    Junior Member
    Join Date
    Apr 2015
    Posts
    11

    Default

    Just curious if you have figured out how to get everything to work with the e67 in the 2005 Silverado as I also have huge interest in doing this in my 2005 just mine is 2wd...

    And if so would you mind sharing what was involved?

  4. #14
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    Quote Originally Posted by Lsjuan View Post
    Just curious if you have figured out how to get everything to work with the e67 in the 2005 Silverado as I also have huge interest in doing this in my 2005 just mine is 2wd...

    And if so would you mind sharing what was involved?


    Sure. i did complete it, i did used the DRAC module for the ABS or you can run something similar from dakota digital, you just need to look at the trailblazer SS E67 wiring diagrams and it will work, if you look at both wiring diagrams, it is very similar, i used a 6L80 and the P R N D worked +, cruice control, A/C pcm controlled, etc

  5. #15
    Junior Member
    Join Date
    Apr 2015
    Posts
    11

    Default

    That’s awesome I did also read somewhere that the backup lights were an issue?

  6. #16
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    [QUOTE=Lsjuan;242154]That

  7. #17
    New Member
    Join Date
    Feb 2008
    Posts
    6

    Default

    Hey guys, I have been working on a very similar swap for 2 years now. These past 2 months is where I really got deep into it trying to finish my truck. Id be happy to help anyone with any questions. As far as the reverse light goes. In my 2006 Silverado with the class 2 data hooked up it automatically works when it goes into reverse. I was not aware the class 2 would also take care of that but it did and work like a charm.

    My setup is a 06 Silverado 4x4 with a Real LSA swap and 6l80e trans. I am running the 09 tbss file. Trying to figure out how to enable the iat2 option. I think its really sad its not an available option when it would really work. Since enabling the supercharger works , intercooler output works, flexfuel output works. no reason iat2 wont work. I was even thinking of a possible segment swap with a 09 ctsv file

  8. #18
    New Member
    Join Date
    Sep 2018
    Posts
    1

    Default

    I am doing a 2013 L94 6.2 & 6L80 with nqh transfer case into a 2004 gmc 1500 extended cab 4x4 pickup ,I believe I have everything figured out except the transfer case, which tc did you use and what did you do about shift circuit

  9. #19
    New Member
    Join Date
    Feb 2008
    Posts
    6

    Default

    I used the 263xhd tcase out of the duramax, with the 6l90 transmission, wiring was all duramax and programmed the tcase module as a duramax

    Sent from my SM-N950U using Tapatalk

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Weird Cruise Control Issues since latest update...
    By analog56x in forum Cummins 5.9L
    Replies: 0
    Last Post: September 15th, 2015, 09:50 AM
  2. Camaro ZL1 E67 SERIAL DATA???
    By 400ss in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: September 21st, 2014, 07:42 AM
  3. Replies: 0
    Last Post: June 24th, 2014, 01:07 AM
  4. GMPP E67 and Cruise Control
    By 95wagon in forum E37, E38 & E67 PFI ECM's
    Replies: 10
    Last Post: September 29th, 2010, 03:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •