Results 1 to 6 of 6

Thread: Lb7 help e54

  1. #1
    Junior Member
    Join Date
    Apr 2016
    Posts
    19

    Default Lb7 help e54

    You guys are going to hate me with this one. Haha. I have an 03 lb7. This truck was all stock. I did dsp5 with tunes and position 5 as a lope just to mess around. I don't really like lope tunes but figured hey what the heck. Anyhow. I've done lope tunes before just not on my truck. When I go to position 5 the rpm just goes up maybe 25rpm or so. It just stays there. No lope. I tried anywhere from 10-60%. Still nothing. Just roughly 50rpm increase that holds steady. I even tried changing the lope to dsp 1,2,3. Still nothing. I even tried the 400 and 800 cells. Nothing. Now I don't really care about the lope tune just curious why it won't work on this truck. I'm even wondering if the full flash I did when I converted to dsp5 didn't fully take. Everything works well and all my positions work. I used late lb7 script. Just for the heck of it I loaded my complete file in my other truck. Still no lope in that truck either. It's odd. What am I missing. A torque table limiting it??? Idle parameters???? I can't figure it out. More curious than anything.

  2. #2
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    For a lope on an LB7, all you have to do is put 50 into the 0.0% TPS table of A4102 at 600 RPM's.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  3. #3
    Junior Member
    Join Date
    Apr 2016
    Posts
    19

    Default

    That is what I have. It won't work on this truck. I have done lots of lope tunes before. I usually put 21 in the 600 table at 0. I know how it works but on this one it won't. I don't need a lope tune. Just want to know why it doesn't work. My 1st post explains everything I have tried after it didn't work. Any suggestions

  4. #4
    Junior Member
    Join Date
    Apr 2016
    Posts
    19

    Default

    Click image for larger version. 

Name:	lb7.jpg 
Views:	324 
Size:	1.08 MB 
ID:	19489

  5. #5
    Junior Member
    Join Date
    Apr 2016
    Posts
    19

    Default

    With engine running how can I log/view cells that are being triggered at that moment.

  6. #6
    Junior Member
    Join Date
    Apr 2016
    Posts
    19

    Default

    Lope works on stock thru DSP2 Does not work on DSP3 and DSP4. But my tunes do work on DSP3 and 4

Similar Threads

  1. Replies: 2
    Last Post: April 28th, 2015, 01:25 AM
  2. LB7 help please
    By RUTAN TA in forum General (Diesel)
    Replies: 1
    Last Post: March 2nd, 2014, 12:29 AM
  3. 01 LB7 PCM in 04 LB7 truck?
    By KLUG'S SS in forum Duramax LB7
    Replies: 2
    Last Post: December 26th, 2013, 01:25 AM
  4. RR for LB7
    By GL4787 in forum RoadRunner Real-Time PCM Emulator
    Replies: 4
    Last Post: April 8th, 2009, 01:12 PM
  5. 03 LB7 pcm into 01 LB7
    By red12secz28 in forum Duramax LB7
    Replies: 4
    Last Post: November 19th, 2007, 09:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •