Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: New member intro and '411 swap question

  1. #11
    Junior Member Dewglass's Avatar
    Join Date
    Nov 2010
    Posts
    37

    Default

    Quote Originally Posted by joshwho? View Post
    Does anyone know who has done a '96 to '411 swap? I've searched and searched and everyone refers to "swap diagrams", but I have yet to see any of them posted up anywhere. How do I track one down? Thanks again for all the help guys!

    http://www.gmtruckcentral.com/articles/12200411.html
    '02 S10 Xtreme 4.3 Syclone power; AWD, 4L60E; 411 PCM: Walbro 255; 160F thermo: Front coil overs, 4" static drop;

  2. #12
    Junior Member joshwho?'s Avatar
    Join Date
    Apr 2016
    Posts
    14

    Default

    See, that would be fine and dandy, but the first step? PM Lextech ...and well I've tried that here a couple times (even offering to PAY him for his time and the spreadsheet) and made an account on another board (possibly the one just listed) just to message him. I know he is busy and he's quite the knowledge base, but I can't seem to intice him to get back to me. Does anyone have any insight on that portion of it all? Thanks again! -Josh

  3. #13
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Just keep trying.

  4. #14
    Junior Member Dewglass's Avatar
    Join Date
    Nov 2010
    Posts
    37

    Default

    Quote Originally Posted by joshwho? View Post
    See, that would be fine and dandy, but the first step? PM Lextech ...and well I've tried that here a couple times (even offering to PAY him for his time and the spreadsheet) and made an account on another board (possibly the one just listed) just to message him. I know he is busy and he's quite the knowledge base, but I can't seem to intice him to get back to me. Does anyone have any insight on that portion of it all? Thanks again! -Josh
    lexus technician has no obligations to help. (anyone)

    http://troubleshootmyvehicle.com/gm/...96-1997-page-1

    http://www.ls1truck.com/forums/lsx-t...-diagrams.html

    http://www.lt1swap.com/99-02_vortec_pcm.htm

    I may have a factory 2001 4.3 0411 wiring list -not sure if it is on a thumb drive-worse comes to worse I can scan out of the factory manual. The first link looks pretty good for early PCM wiring.
    Last edited by Dewglass; September 7th, 2016 at 06:16 AM. Reason: +
    '02 S10 Xtreme 4.3 Syclone power; AWD, 4L60E; 411 PCM: Walbro 255; 160F thermo: Front coil overs, 4" static drop;

  5. #15
    Member
    Join Date
    Jun 2013
    Posts
    96

    Default

    I just started a 2003 4.3 into a 1999 s10 swap and ran across this thread. It's amazing how little documentation is available on the v6 ls1b implementations. It seems like most of the pinouts are the same between the v6 and v8 ls1bs. These are the relevant pinouts I have found so far. I hope this helps.Click image for larger version. 

Name:	PCM C1 BLU 2.gif 
Views:	1300 
Size:	69.6 KB 
ID:	20609Click image for larger version. 

Name:	PCM C1 BLU 1.gif 
Views:	648 
Size:	63.3 KB 
ID:	20610Click image for larger version. 

Name:	c1.gif 
Views:	630 
Size:	52.2 KB 
ID:	20611Click image for larger version. 

Name:	c2.jpg 
Views:	390 
Size:	202.2 KB 
ID:	20612Click image for larger version. 

Name:	c3.jpg 
Views:	537 
Size:	206.5 KB 
ID:	20613Click image for larger version. 

Name:	C4.gif 
Views:	506 
Size:	47.5 KB 
ID:	20614

  6. #16
    Member overS10ded's Avatar
    Join Date
    Mar 2009
    Posts
    74

    Default

    I have '96 to 02 '0411 pinouts for S10 4.3-pm me your email and I'll send you the file! It was given to me from Lextech in '09. He is the MAN!!! Kudos again to him!!

    Good times!
    Bruce
    Last edited by overS10ded; January 9th, 2017 at 08:36 AM. Reason: misspelling...
    Brucemobile: '91 S10 Blazer 4dr, 4x4 - '96 4.3 Vortec V6-stock, '0411 PCM conversion, marine manifold conversion, 44# Deka injectors, intercooled Procharger P1SC w/3.2 pulley, Headman long tube headers - 3" single exhaust, custom 700r4, 2500 stall w/lockup, 2002 S10 Blazer suspension and 4 wheel disc brakes, coil over front suspension conversion-torsion bar delete, zexel torsen posi 3.42 w/ 245/45r17's. EFILive tuning.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. 411 Swap Problems
    By HellKnightHicks in forum Vortec V6/V8 Specific
    Replies: 3
    Last Post: September 16th, 2015, 12:50 AM
  2. 411 swap did not go well
    By FeetDry in forum Gen III V8 Specific
    Replies: 51
    Last Post: June 9th, 2011, 03:50 AM
  3. Intro and 6L80E question
    By Goofyguy in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 2
    Last Post: February 15th, 2011, 08:43 AM
  4. 411 swap cmp -40*
    By 9851Chevy in forum Vortec V6/V8 Specific
    Replies: 3
    Last Post: February 7th, 2011, 06:35 AM
  5. 2.2L s-10 411 swap?
    By haulinit in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 5th, 2009, 05:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •