Results 1 to 7 of 7

Thread: 5.3L Single Turbo COS3

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default 5.3L Single Turbo COS3

    So a 63 Nova came into the shop today its got a stock 5.3L with a single Precision 75/76 Turbo setup on it with what I was told were 76 lb injectors. Its got a 4L80E trans with what I was told was a 3000 stall converter. The first issue I have is with the transmission which I think has issues internally, is that it shifts from 1st to 4th and skips 2-3, then when you accelerate more it downshifts to 3rd and then when it tries to shift into 4th is falls to Neutral, But I can fully control and make it shift with the scan tool DVT functions in each gear and lockup. So on to the dyno I get the car to Idle and run, go to make a baseline pull and it all looks good until 2800 RPM's where it acts like it is to rich to run, which it is 11:1 so not that really too rich. then if you lift it will accelerate for a bit, but if you are WOT it will boost and act weird. Ill attach the tune any help would be greatly appreciated. It has a 3 bar MAP, I have a 2 Bar I was going to install and start over of I can't get any help.

Similar Threads

  1. 2006 6.0 single turbo not revving up
    By derkscustomcars in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 6
    Last Post: August 17th, 2015, 03:21 PM
  2. LQ4 single turbo e85 cannot make it idle... Help..
    By carlsonauto in forum General (Petrol, Gas, Ethanol)
    Replies: 25
    Last Post: May 9th, 2012, 07:47 AM
  3. 902hp Common Rail Dodge Single turbo FUEL ONLY!!
    By 2007 5.9 in forum Cummins 5.9L
    Replies: 10
    Last Post: October 9th, 2011, 04:22 AM
  4. Help!04 2500 6.0 turbo COS3 first time MAP tuning
    By Dv8td in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 12
    Last Post: November 7th, 2010, 06:49 AM
  5. Closing turbo vanes for turbo braking?
    By Haulinbass02 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 19
    Last Post: May 14th, 2009, 12:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •