Unable to Datalog with Autocal

[derek1387]

Just received my Autocal from my tuner-was able to flash the tune on just fine. But when I try to Record Data, it does not create a log file. It goes to ECM AIRFUEL, then right back to Record Data, or sticks on ECM Airfuel. I then tried to go to View/Select PIDS, and it shows nothing as well.

EFILive Explorer shows no files saved either.

I dont get the timer, or the different PIDs to look at, or anything.

Attached are two videos-both of which i have sent to the tuner, and he is stumped as well.





Any help?

I also wanted to try to datalog/passthrough the Autocal to EFILive Scan and Tune V8, but doesnt look like V8 supports passthrough logging yet with the Autocal. Sad day.

any help would be much appreciated!

[joecar]

Can you datalog/passthru with V7 software...?

Can you post the AC Options.txt file...

what pids are supposed to be logging...?

What year/model/vehicle...?

[Move'n Up]

You're certain that BBX data logging is setup for your vehicle on the AutoCal?

[derek1387]

2015 Camaro V6 LFX. Has the e39a ECM from what I understand.

I'm honestly not 100% sure. Just got the Autocal and trying to figure things out

I will be posting the Options.txt when I get to a computer

I did just re-do the BBX programming to the Autocal per my tuner and will attempt to log tonight when I get to the car

[derek1387]

You're certain that BBX data logging is setup for your vehicle on the AutoCal?

I have reloaded the config files per my tuner. Still same issue

How do I verify if it's setup properly?

[joecar]

Did you get it sorted out...?

[derek1387]

Yessir, sorry for the delay. Apparently my car can be read on E39A, but scanned/flashed on E39. It only had E39A setup.

Up and running just fine now. Now to setup the wideband!