Results 1 to 3 of 3

Thread: Misfire Detection in Speed Denisty

  1. #1
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default Misfire Detection in Speed Denisty

    Is it possible?

    Thanks
    "All that is needed for the triumph of evil is that good men do nothing..."

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Misfire detection should still work AFAIK.

  3. #3
    Senior Member
    Join Date
    Feb 2006
    Posts
    168

    Default

    LS1B, COS3, I run mine in SD and have had the odd Misfire pop up (couple of track days where I ran low on fuel and slurped air - swirl tank fitted now)

    Regards

    Jim
    2000 LS1 M6, No EGR/Air/PS/CATs. TR230 Cam, COS3, OLSD, LC1 Wideband fitted, Procharger P1SC, 2 Bar MAP, Siemans Dekka 60Lb Injectors.
    All wrapped up in a 2000Lb AC Cobra Replica

Similar Threads

  1. Timing being pulled with no knock detection
    By GLGJR in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: September 7th, 2010, 11:39 PM
  2. Replies: 11
    Last Post: April 25th, 2010, 03:47 PM
  3. Question about Knock Detection
    By dc_justin in forum General
    Replies: 5
    Last Post: June 23rd, 2006, 01:30 AM
  4. Modifying misfire detection tables ?
    By kp in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: May 13th, 2005, 01:09 PM
  5. Misfire detection table
    By jfpilla in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: January 20th, 2005, 09:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •