Try this:
Code:
# ================================================== ============================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
None None "" "No units"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-018
AFR 8.0 20.0 .3 "({EXT.AD1}*2.375)+7.3125)"
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System Description
#------------------------- ---- ------------ ---------------- ----------------------------------------------------------
CALC.AFR_AEM F018 CLC-00-018 AFR 02-wide "AEM Wideband - Input 1"
# place at least 2 blank lines after this one (hit RETURN twice):