i havent been able to figure out screen shots yet do i need to disable ve to do this i will check those tables above thank you for your help someday i hope to make better sense of it all
i havent been able to figure out screen shots yet do i need to disable ve to do this i will check those tables above thank you for your help someday i hope to make better sense of it all
my b3618 is in lambda not sure what to do to set eqr to 1.175 or what you mean and why 0.020 on b3609 b3610 just curious as to why not 0.......and again thank you for all help
maybe I'm closer than i think i changed units on my b0101 to g*k/kpa which is what my map shows and they have a closer relationship did short log on way home from work getting map data from 0.0 -1.5 might go for drive see what happens. Before i was getting numbers like 0.1-0.3 and was looking at B0101 with numbers 13.23-19... and got real frustrated hope im not setting my self up
See post #2 here: Hosting-an-Image
In tunetool, go Edit->Properties->Display and set Commanded Fuel Units to EQR.
We're using this convention to avoid ambiguity:
- commanded fueling is in EQR.
- wideband measurement is in Lambda.
The correction factor (aka BEN) is then easier to remember:
wideband_lambda x commanded_eqr
0.020 s on B3609, B3610:
this avoids zero which may have a special meaning (depending on who's experiment you look at).
and this is new log Log_0006.efi
my dynamic air pid stopped working no idea why it was working and I'm not sure how i got it to then i fought with it for days then all of sudden it worked made log and wideband didn't now opposite this os is not in list so i'v been trying to figure that out but i get lost wish i could just lock myself in a room for couple days and work this out the guidance has been awesome though my navigation skills are picking up and thats bound to make things easier to remember and understand