im following the VVE tuning guide and am applying the changes to b8101 and the AFR's will not move from 11.6
i dont have any problems flashing the map and it seems like the changes i make are not being applied. Can someone please help?
im following the VVE tuning guide and am applying the changes to b8101 and the AFR's will not move from 11.6
i dont have any problems flashing the map and it seems like the changes i make are not being applied. Can someone please help?
pm me your phone #
or I'll pm you mine...
Last edited by joecar; May 30th, 2016 at 09:39 AM.
Did you fail the MAF, a DTC must show up immediately on engine start.
Did you generate coeffs...?
Try pasting to the other 1-bar VVE tables also, and generate their coeffs.
Did you disable CL and any/all forms of fuel trimming (LTFT, STFT, and any others if they exist, e.g. STFT on OL stoich)...?
Is your wideband producing correct/sane lambda measurements...?
Is the ECM saying correct/sane commanded lambda, does it agree wjth the acgive fuing table (i.e. OL or PE)...?
Last edited by joecar; May 30th, 2016 at 11:58 AM.
Are you logging SAE.LAMBDA...? Try this instead of AFR.
EDIT: I can now look at your log in post #1, and I see that you are logging SAE.LAMBDA.
Last edited by joecar; May 30th, 2016 at 04:04 PM.
What are you using for BEN pid...?
It should calculate {EXT.WO2LAM1}/{SAE.LAMBDA}
Last edited by joecar; May 30th, 2016 at 11:57 AM.
able to log and I copied table with labels over to those 4 parameters on VVE and did a paste with multiply, generated vve, then coefficients, and it just seemed to run even worse.
I have no idea what the problems was. it turned out to be a mess with my buddy having to get a two truck home because we simply ran out of time and we have to work tomorrow. I kept making changes and flashing but the AFR's didnt move. Today was very frustrating but I thank you Joe for helping me out.
From the log in post #1 it looks like your wideband is not working properly.
Oh man... Well I'll post it tomorrow. I'm really trying to work out the idle. I can't drive it anywhere without stalling, and it has a hard time running period. Can I just multiply the whole vve table by 0.7 to get it to run leaner if my current lambda eqr is 1.3 off?