Results 1 to 6 of 6

Thread: Volunteers needed for E38/E67 Calc.VET project.

  1. #1
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    651

    Default Volunteers needed for E38/E67 Calc.VET project.

    I'm going to be working with joecar to try to produce a Calc.VET for E38/E67 vehicles. Neither of us has an E38/E67 vehicle so we need volunteers to do some tuning changes and make some logs for us.

    We're not even sure yet if it can be done, but we are prepared to try... so if you have a suitable vehicle and want to be a part of this project, then let us know.

  2. #2

    Default

    i just sent joecar a msg about this, i have a 2010 camaro its all back to stock now we can use for this. used to have a 427 with f1r procharger so the only thing i didnt change back to stock is the fuel system.
    Martin
    Custom Performance Racing Engines
    www.CPRENGINES.com
    310-427-7486

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,777

    Default

    Hey Martin,

    Thanks... this will be good since we would be able to use the chassis dyno.

    If it now has a return FPR, did you connect the FPR's reference to intake manifold (i.e. MAP)...?
    If so then did you edit the IFR table and the Voltage Offset table...?
    (otherwise if the reference sees BARO then those tables can be left stock).

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,777

    Default

    Martin at CPR Engines in Gardena texted me that we'll also use the engine dyno.

  5. #5
    Junior Member
    Join Date
    Oct 2010
    Posts
    29

    Default

    I'm in.
    2010 Camaro SS
    Whipple, LTs, CIA, 3bar,LM1 WB02

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,777

    Default

    ok, thanks.

Similar Threads

  1. Replies: 76
    Last Post: October 20th, 2019, 01:33 PM
  2. Calc VET Again
    By pormgb in forum Gen III V8 Specific
    Replies: 6
    Last Post: September 8th, 2013, 02:54 AM
  3. E40-E38-E67 B5101 Calc Error?
    By TBMSport in forum E37, E38 & E67 PFI ECM's
    Replies: 10
    Last Post: October 24th, 2011, 03:34 PM
  4. Calc.VET, VET Map Average is all 0.0?
    By n8dogg in forum Gen III V8 Specific
    Replies: 3
    Last Post: July 15th, 2011, 01:20 PM
  5. E67 & E38 pinouts needed.
    By nycblazer in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: March 6th, 2008, 03:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •