Page 4 of 14 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 134

Thread: Volunteers needed for E38/E67 Calc.VET project.

  1. #31
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    735

    Default

    Quote Originally Posted by rcr1978 View Post
    Any interest in the E82 ecm for the 3.6L LGX VVT SIDI it's in a 17 Acadia, my OS is not mapped yet, same engine that's in the Cadillac and Camaro just not sure if they are using the same ecm.
    At this stage I'd like to focus on the E38 and then look at other controllers when we get the E38 working properly.

  2. #32
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    735

    Default

    Quote Originally Posted by minytrker View Post
    I have not tested it but guys are doing it with HPT already. Cant you just use the same PIDS they are using?
    Can you post a link so I can look at that?

  3. #33
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    We'll do E38/E67 first (these 2 are fairly identical)...

    and then we'll map this to E39, E78, E82, E84, E92...

    some of those ECM's use MAP:BARO ratio on their VVE table axis (so it requires an extra calc pid);

    and on some of those ECM's, the pid SAE.LAMBDA does not work on all OS's (this is bad because then we don't know what commanded fueling is)...
    in those cases, the WO2BEN pid would have to assume a known fueling value from the OLFA and/or PE tables (maybe clone a lookup table).

  4. #34
    Junior Member pir4te's Avatar
    Join Date
    May 2011
    Posts
    43

    Default

    Quote Originally Posted by statesman View Post
    ... so if anyone has an E38 and is prepared to volunteer for the duration of this project, then let me know.
    I have a 2010 e38 and am able to log often as a volunteer.

  5. #35
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by pir4te View Post
    I have a 2010 e38 and am able to log often as a volunteer.
    Thanks, appreciated.

  6. #36
    Junior Member
    Join Date
    Oct 2016
    Posts
    18

    Default

    HI, joecar, new here and also very new to tuning, I understand some basic concepts but still very green, I have a 2009 CTSV, headers and 2.55 pulley, I don't have a wide-band yet would I be any help to you as a volunteer? I work nights so I can log all day plus I have plenty of road where I live that is private so no interruptions.

  7. #37
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    735

    Default

    BADCADDY and pir4te, thank you to both of you for volunteering. You do need to have made 10 posts on here before your private messaging gets activated, so I can't privately message either of you at the moment.

  8. #38
    Junior Member pir4te's Avatar
    Join Date
    May 2011
    Posts
    43

    Default

    No problems.

  9. #39
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    735

    Default

    pir4te, what mods does your engine have?

  10. #40
    Junior Member pir4te's Avatar
    Join Date
    May 2011
    Posts
    43

    Default

    Quote Originally Posted by statesman View Post
    pir4te, what mods does your engine have?
    There's quite a bit in the detail but basically high compression NA daily street build utilising ethanol, managed with VVT. Tuned bolt-ons.

    Please excuse my #humblebrag while I get my post count up to speed:

Page 4 of 14 FirstFirst ... 23456 ... LastLast

Similar Threads

  1. Replies: 83
    Last Post: September 5th, 2023, 11:30 AM
  2. Volunteers needed for E38/E67 Calc.VET project.
    By statesman in forum Gen IV V8 Specific
    Replies: 5
    Last Post: May 30th, 2016, 08:19 AM
  3. E40-E38-E67 B5101 Calc Error?
    By TBMSport in forum E37, E38 & E67 PFI ECM's
    Replies: 10
    Last Post: October 24th, 2011, 03:34 PM
  4. Calc.VET, VET Map Average is all 0.0?
    By n8dogg in forum Gen III V8 Specific
    Replies: 3
    Last Post: July 15th, 2011, 01:20 PM
  5. E67 & E38 pinouts needed.
    By nycblazer in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: March 6th, 2008, 03:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •