Page 5 of 21 FirstFirst ... 3456715 ... LastLast
Results 41 to 50 of 207

Thread: AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge

  1. #41
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,936

    Default

    This would be absolutely fantastic to get going!

    Dr. Mike, does AEM usually ship their WBO2s with a USB flashing tool to do consumer-side updates? Or is this a AEM or developer-only tool? Trying to figure out if I purchase one now with the existing code how I can get it updated to the code that works with EFILive.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  2. #42
    Member
    Join Date
    Jul 2016
    Posts
    89

    Default

    The re-FLASH tool is not available to the public, at the moment. So, for EFILive support, you will have to hold off until the new code is released. :(

  3. #43
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'm told that AEM will be doing a video soon on the X-series on location at CPR Engines here in LA.

  4. #44
    Member
    Join Date
    Jul 2016
    Posts
    89

    Default

    Ok. I have an initial test version ready.

    mode 0x2c Sets the DPID packet id
    mode 0xaa Starts the data stream on controllerID - 0x200 ( e.g. 0x7EE - 0x200 = 0x5EE )
    mode 0x3e is the keep alive. otherwise stream terminates after 5 seconds.

    What datarate is expected ?





    formatting of data is per PID 0x24 lambda values only.

  5. #45
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by dr.mike View Post
    Ok. I have an initial test version ready.

    mode 0x2c Sets the DPID packet id
    mode 0xaa Starts the data stream on controllerID - 0x200 ( e.g. 0x7EE - 0x200 = 0x5EE )
    mode 0x3e is the keep alive. otherwise stream terminates after 5 seconds.

    What datarate is expected ?





    formatting of data is per PID 0x24 lambda values only.
    dr.mike,

    pm Blacky (Paul).

  6. #46
    Member
    Join Date
    Jul 2016
    Posts
    89

    Default

    I don't get that option on his account name.

    I was able to scrounge up the GMLAN info for the packet rate. So, everything looks good to go.

    0x03 0xaa 0x02 0xfe -> rate = 1000ms ( slow )
    0x03 0xaa 0x03 0xfe -> rate = 200ms ( medium )
    0x03 0xaa 0x04 0xfe -> rate = 25ms ( fast )

    I added :

    0x03 0xaa 0x05 0xfe -> rate = 10ms ( super fast )
    0x03 0xaa 0x06 0xfe -> rate = 5ms ( near insane )
    0x03 0xaa 0x07 0xfe -> rate = 2ms ( insane )

    We are ready for the 1st go-round
    Last edited by dr.mike; July 23rd, 2016 at 03:59 PM.

  7. #47
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,936

    Default

    dr.mike, believe you need 10 posts before you can send a PM. You're at 9 now, reply back here then you should be able to PM Blacky (Paul).

    Happy to help out with this state-side if needed. Even if it requires shipping my WBO2 back and forth to dr.mike a few times.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  8. #48
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Ah, I should have known (10 posts to enable pm's), sorry

    I pm'd Paul anyway.

  9. #49
    Member
    Join Date
    Jul 2016
    Posts
    89

    Default

    Ah. Ok.

    I'll give that a shot.

  10. #50
    Member
    Join Date
    Jul 2016
    Posts
    89

    Default

    Nope... I must be missing something.

    Too bad. It's ready to go.

    P.S.

    On your UserID, there is a link for "Send Email". But, it's no there for Blacky :(
    Last edited by dr.mike; July 25th, 2016 at 04:18 PM.

Page 5 of 21 FirstFirst ... 3456715 ... LastLast

Similar Threads

  1. SM-AFR, DM-6 WIDEBAND AFR GAUGE COMBO good for EFILive Monitoring?
    By Black LS1 T/A in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 7
    Last Post: January 17th, 2016, 04:11 PM
  2. V1, randomly cannot log AFR w/ AEM Uego
    By Tan327 in forum General
    Replies: 8
    Last Post: February 24th, 2012, 03:40 PM
  3. AEM UEGO wideband Pid?
    By derkscustomcars in forum External A/D inputs
    Replies: 2
    Last Post: August 8th, 2011, 02:42 AM
  4. An AFR Gauge is a pretty good E10+ fuel sensor
    By 98 tigershark in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: September 19th, 2009, 07:16 PM
  5. AEM Gauge type 6 in 1 WB UEGO controller
    By JET LEE in forum Gen III V8 Specific
    Replies: 10
    Last Post: January 25th, 2007, 09:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •