Results 1 to 5 of 5

Thread: FlashScan No longer working over USB

  1. #1
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default FlashScan No longer working over USB

    My FlashScan has just stopped connecting to my laptop... Ive tried a couple of different USB cables and different ports but the Flash and Scan Tool wont connect.

    Takes for ever to come up when connecting the device Via USB. Blue Light doesnt flash any more. Never had this problem before.

    Does this mean that it needs to be sent in for servicing?

    Its a V2

    Model: FSV2

    Firmware
    Ver: 2.07.82
    Date: April 10, 2015

    Boot Block
    Ver: 2.07.07
    Feb 07. 2014


    Im on Windows 10...
    Bummer....
    Last edited by HellKnightHicks; May 29th, 2016 at 11:55 AM.

  2. #2
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    I do not have this xHCI Technology that is listed in the following thread
    https://forum.efilive.com/showthread...rs-(USB3-xHCI)

    I have successfuly flashed using this setup in the past.

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by HellKnightHicks View Post
    Does this mean that it needs to be sent in for servicing?
    The three most common causes that prevent a FlashScan device from connecting via USB are:

    1. The USB drivers are not installed correctly on the PC.
    2. The USB-B socket at the top of the FlashScan device has cracked/broken solder joints.
    3. The USB sacrificial power chip has been damaged. That chip will fry itself to protect the rest of the device and to protect your PC/laptop from high current/voltage originating from the vehicle connected via FlashScan to your laptop.


    Item 1 can usually be fixed by removing the EFILive/FTDI drivers and re-installing them. To do that, use the Start->All Programs->EFILive->V8->EFILive USB Manager software. Remove all drivers, then install all drivers again.
    Item 2 can usually be fixed by reflowing the solder joints around the USB-B socket on the FlashScan circuit board. If your device is still under warranty then you should return it to an authorized EFLive repairer for repairs. Opening the device and reflowing the solder yourself will void any warranty.
    Item 3 should be fixed by an authorized EFILive repairer who has the correct replacement chip.

    In the US you should return your device to SoCal Diesel, their contact details are here: http://www.efilive.com/distributors

    Regards
    Paul
    Before asking for help, please read this.

  4. #4
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    Re installing EFILive V8 seemed to fix my issue.

    Thanks for the response.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ok cool

Similar Threads

  1. Uninstalling and reinstalling FlashScan/AutoCal USB drivers
    By Blacky in forum Software Updates and Installation Help
    Replies: 15
    Last Post: December 22nd, 2023, 08:01 AM
  2. FlashScan/AutoCal USB Drivers: IMPORTANT INFORMATION
    By Blacky in forum Software Updates and Installation Help
    Replies: 7
    Last Post: February 2nd, 2016, 04:23 AM
  3. Broken link to Flashscan USB driver
    By SS-1500 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: December 3rd, 2005, 10:38 AM
  4. Got FlashScan Working I'm So Disappointed
    By MN C5 in forum General (Petrol, Gas, Ethanol)
    Replies: 14
    Last Post: April 30th, 2005, 10:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •