Results 1 to 4 of 4

Thread: outside parameters

  1. #1
    Junior Member
    Join Date
    Nov 2004
    Posts
    12

    Default outside parameters

    I know you can log wideband, and egt as outside inputs, but how many outside inputs can be connected to the Flashscan module? If you could abb boost, and fuel pressure, it would be perfect for a boosted app. :P

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    The Flashscan adaptor has one dedicated EGT (or TypeK thermocouple) input and two A/D 0-5V inputs. So if you have a boost sensor or F.P sensor that outputs within that range you could log it.

    Cheers,
    Ross

  3. #3
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    Are the FP sensor from digital gauges in that range that you know of?

    I don't think they output voltage, but resistance...

    anyway to adapt this?

    Thx
    "All that is needed for the triumph of evil is that good men do nothing..."

  4. #4
    Junior Member
    Join Date
    Nov 2004
    Posts
    12

    Default

    What about the factory MAP sensor? Could that be used to indicate boost?

Similar Threads

  1. New A6 Parameters
    By gmh308 in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 4
    Last Post: March 15th, 2009, 07:33 PM
  2. Any one know what parameters....
    By 98SS2836 in forum Gen III V8 Specific
    Replies: 0
    Last Post: January 16th, 2007, 04:01 AM
  3. available parameters on the LB7?
    By forcefedjunkie in forum Duramax LB7
    Replies: 3
    Last Post: September 22nd, 2006, 09:23 AM
  4. What happened to the LL8 parameters?
    By blandmiller in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: August 15th, 2006, 04:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •