Results 1 to 3 of 3

Thread: full flashing al5 controller with v2 (allison tcm)

  1. #1
    New Member
    Join Date
    Mar 2010
    Posts
    8

    Default full flashing al5 controller with v2 (allison tcm)

    my v2 using v8 software will not allow me to full flash an al5 controller i have a heard that i need to have a commercial scan and tune to be able to do this i am wondering if this is true and if so am i able to change mine to a commercial scan and tune and what the cost would be any help is appreciated thanks

  2. #2
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Due to the complexity to implement full flash for AL5, at this point it is only available via V7.5 software.

    To use full flash via V7 software, ensure you close your V8 software, and connect your FlashScan V2 prior to opening the V7.5 Tune tool.

    Cheers
    Cindy

  3. #3
    New Member
    Join Date
    Aug 2017
    Posts
    1

    Default

    Having an issue full flashing an al5 tcm, I have done this in the past using the method above. 7.5 tells me the flashscan interface cable is not licensed. V8 says the the controller is licensed. I have updated firmware tried public release and beta 5 versions of 7.5 and v8. Any help would be greatly appreciated.

Similar Threads

  1. Allison AL5 Shift Parameters
    By TravisF in forum Allison 5 & 6 Speed
    Replies: 16
    Last Post: April 18th, 2016, 02:03 PM
  2. 2011+ TCM Full flashing
    By rcr1978 in forum Allison 5 & 6 Speed
    Replies: 57
    Last Post: November 7th, 2015, 07:00 PM
  3. Full flashing tcm LLY
    By maxtuner in forum Duramax LLY
    Replies: 14
    Last Post: February 5th, 2014, 03:27 PM
  4. Full reflash for Allison TCM
    By MaxPF in forum General (Diesel)
    Replies: 2
    Last Post: January 25th, 2011, 07:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •