OS: 12637084
Cal: 12635862
I've changed B2101 and B2103 for the 3bar MAP.
{B2101} MAP Sensor Scaler 312.500000 scaler
{B2103} MAP Sensor Offset -11.250000 kPa
Since I'll be less than 14 lbs of boost I will be using the 2bar VVE table
[{B8103} "Virtual VE Table, 2bar Forced Induction"]
So what else is needed?
{B8021} "Operating Zone MAP Boundaries"
{B8034} Estimated MAP Maximum
I've been looking over the LSA tune, but dont know how it is configured physically vs a whipple.
Thanks