Results 1 to 4 of 4

Thread: 2015 LML will not start!!

  1. #1

    Default 2015 LML will not start!!

    We have read and flashed this vehicle before and upon doing the V7.5 and V8 updates when we were flashed in a new file it erased the PCM and left it dead. I have contacted support and they replied with send a new read file, not a previously saved one which is impossible due to the PCM being blank. Any help would be greatly appreciated. Currently we are downloading previous version of 7.5 and 8 to see if this works. Thank You in advance.

  2. #2
    Lifetime Member
    Join Date
    Jan 2006
    Posts
    387

    Default

    You can't read the ecm so i'm not sure what your trying to accomplish there? Go to TIS find the correct cals as stated in the LML quick start guide (found in the scan/tune program, get the correct tune tune file, try a cal flash and if that doesn't work try a full flash.
    04 LB7
    2010 LMM
    2015 LML

  3. #3

    Default

    Well we got it sorted. We did the V7.5 and V8 updates about a month ago and when we went to flash the truck it said there was no license for the ECM, which had been licensed previously. I sent the log into support and the reply I received was read the ECM fresh. I know these can't be read out and have yet to receive further instructions from them but found that when we uninstalled the new 7.5 and 8 then downloaded and installed the December 2015 release it is now flashing fine.

  4. #4
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    In the last month there has been 5 releases, the current Release Candidate 2 software, or the December public release is the software all customers should be running.

    The only reason I can think that support told you to read your ECM was that it wasn't clear you had an LML. If that is not the case, please pm me your conversations with support and I'll address it.

    Cheers
    Cindy


    Sent from my iPad using Tapatalk
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. 2015 lml trans limp
    By stang_j_99 in forum Duramax 2011+ LML / LGH
    Replies: 12
    Last Post: October 2nd, 2019, 01:18 AM
  2. 2015 LML Delete
    By Road in forum Duramax 2011+ LML / LGH
    Replies: 9
    Last Post: June 1st, 2018, 02:56 AM
  3. Brand new ecm 2015.5 lml
    By I_can_Break_It in forum Duramax 2011+ LML / LGH
    Replies: 1
    Last Post: April 2nd, 2016, 11:29 AM
  4. 2015.5 lml t87 willing to test..
    By I_can_Break_It in forum Do you want to be a Beta Tester?
    Replies: 0
    Last Post: September 27th, 2015, 04:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •