No start E38 ECM in engine swap

[derkscustomcars]

Hello,

could someone have a look at this tune, customers vehicle wont start and he is a long ways away from my shop. he send me the ECM and i dont know if i did anything wrong as i currently dont have and engine or truck here to test the ECM on

thanks in advance

Matt

E38_0113.ctz

[ScarabEpic22]

Looks like VATS is set to Type 3, dont have my V2 handy to see if the VATS patch to disable it is applied. How is the starter relay wired up in the swap? It's currently set to a factory value in parameter G1220 so the ECM is going to control the starter. If the swap is setup to control it that way, not a problem, if the starter is standalone then it wont work.