Help!! Error code 0371 after flash. Now truck will not start!

[DODGE-2010]

Flashed truck and received error code 0371. Will not let me reflash and truck will not start. Wondering if anyone has a idea what to do??

[GMPX]

Not knowing what year or ECM type I can't give you any specific things to try.
But if you try just unhooking the battery for 30 seconds then retry the flash it should go in to recovery mode and get you up and running again.

[DODGE-2010]

Not knowing what year or ECM type I can't give you any specific things to try.
But if you try just unhooking the battery for 30 seconds then retry the flash it should go in to recovery mode and get you up and running again.

It's a 2010 Dodge Ram 2500 6.7l. As far a ecm its stock. I will try the batteries. Any other ideas would be great. Hopefully the ecm is not damaged I did try disconnecting both positive cable on the battery's. But still the same

[2007 5.9]

Did you try the bootloader file first?

[DODGE-2010]

Did you try the bootloader file first?

I don't know much about the software. How would I do that?