Results 1 to 10 of 10

Thread: error $0185 for lml

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default error $0185 for lml

    went to bbl my lml and gave me error 0185 i deleted all pids except for e86a and ibalso reconfig file system now it says something about config files required. whats the deal? i have latest updates

  2. #2
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    Nobody? I haven't used efilive in awhile so kind of confused when you all talk about config files, ppm, options text etc. can you help I would like to do some logging before I mod the truck, while I am on my 3000 mile road trip

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    From the error codes pdf:

    $0185 F_ERR_NOTFOUND A file or folder was not found. You may need to copy a required file to
    FlashScan or AutoCal using
    EFILive_Explorer.
    Or you may need to format the target file
    system, see description for error $0182
    above



  4. #4
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    ok got the error to go away and when i hook to truck it lets me pick the pid for the ecm but its blank. when i go into v8 and open scan tab it shows pids so i dont know why it shows there but not when i hook up BBL to truck

  5. #5
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    There are 2 ways to data log using V8 software, based on the steps you've outlined above using V8 software we have no idea knowing which option you used.

    1. Pass-thru logging- To access this, connect FlashScan V2 to your vehicle and PC, then launch V8 Scan and Tune software. Navigate to [F2: Scan], select your ECM and PID's.

    2. BBL - To setup standalone logging , connect FlashScan V2 to your PC, then launch the V8 Scan and Tune software. Navigate to [F5: BBX] -> [F2: Scan]. Select you controller and PID's and PROGRAM your FlashScan device so it receives the correct configuration files to all standalone logging. This knowledgebase article should assist you in configuring your FlashScan for black box logging (BBL) https://support.efilive.com/kb_artic...6659-YAHB-3781

    Cheers
    Cindy

  6. #6
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    Ok just so i do it right, I add the pids i want and just hit save? When do you use the program/config button?

  7. #7
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Quote Originally Posted by pavetim View Post
    Ok just so i do it right, I add the pids i want and just hit save? When do you use the program/config button?
    Saving saves the selections to your PC for later use - so that you don't need to redefine the setup should you wish to access it or change it in the future.

    Program copies the selections made into the software onto your FlashScan.

    Cheers
    Cindy

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Save writes to a file on your PC.

    Program writes it to your V2... you have to do this.

  9. #9
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    Got it now just need to figure how to change the units in my bBL

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by pavetim View Post
    Got it now just need to figure how to change the units in my bBL
    If you configured Custom units in BBL, then on the FSV2 keypad ENTER toggles between Default units and Custom units.

Similar Threads

  1. Error $0185, one fix?
    By Wolfie in forum FlashScan V2
    Replies: 1
    Last Post: August 7th, 2011, 09:11 AM
  2. Error: $0185
    By gpr in forum Gen III V8 Specific
    Replies: 3
    Last Post: September 18th, 2009, 08:39 AM
  3. error $0183 and $0185
    By Highlander in forum FlashScan V2 BB Logging
    Replies: 1
    Last Post: May 24th, 2009, 03:39 PM
  4. $0185 error
    By hymey in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: March 23rd, 2008, 11:52 PM
  5. Error $0185 when copying files
    By Blacky in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: December 31st, 2007, 05:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •