You set PE to Lambda 1.175 (i.e EQR 0.85)... this is why your log shows EQR 1.0 during WOT (PCM will not go leaner than EQR 1.0)... this is dangerously lean.
when you look at B3618 or B3605, pay attention to the units (see upper right panel).
Do this:
- open tunetool,
- go Edit->Properties and set Commanded Fuel Units to EQR, and click Ok.
- exit tunetool,
- restart tunetool,
- goto B3618 and set it to EQR 1.175.
- save file and flash to PCM.