Results 1 to 4 of 4

Thread: LML E86 Initialization

  1. #1
    Senior Member
    Join Date
    Feb 2012
    Posts
    136

    Default LML E86 Initialization

    Can we initialize a new LML ECM with EFILive, and set the injector data? I would also like to flash the ecm on the bench. If someone could share the E86 A and B (if it's different) pin-out that would be great. Does EFILive have any plans on updating the bench flash guide with latest ECM, TCM, and PCM's that are now supported?

    Thanks

    Sam

  2. #2
    Senior Member
    Join Date
    Aug 2008
    Posts
    100

    Default

    It can set injector data and I believe it can do the initial flash on a bench but not in the truck.


    Sent from my iPhone using Tapatalk

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Sam I think on the older E35's we could force the ECM to learn the injector codes from the Glow Plug Module (they are stored there too), the same system may exist on the E86 but I am not 100% sure on that. A Full flash with EFILive is the same as what TIS does.
    The bench harness tutorial is very time consuming to present it the way it is done which is why it hasn't been updated for a long time, it just keeps getting pushed to the back of the queue.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Senior Member
    Join Date
    Feb 2012
    Posts
    136

    Default

    Thank you for the reply. Do you know what pins are needed? I did just notice that efi connections is makeing harnesses for them. This may just be a one time deal. If so 150 is a little steep for a one time flash.

    Thanks



    Sent from my SAMSUNG-SGH-I337 using Tapatalk

Similar Threads

  1. LML Programming
    By Road in forum Duramax 2011+ LML / LGH
    Replies: 4
    Last Post: May 25th, 2015, 03:03 AM
  2. Lml map
    By garrettg.bpd in forum Duramax 2011+ LML / LGH
    Replies: 4
    Last Post: October 8th, 2014, 02:55 PM
  3. E86 Interfacing
    By killerbee in forum Duramax 2011+ LML / LGH
    Replies: 4
    Last Post: April 10th, 2013, 06:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •