Auto to Manual Segment swap

[HellKnightHicks]

I need to do a segment swap on a 411 PCM

I have a 1996 Chevy c1500 Extended cab with marine inatake and green giant injectors...

Im swapping from a 4L60E to a t56.

Im not sure how to do a segment swap. Is there a guide that im just not seeing or does someone have some steps.

Im assuming ill need a manual Camaro Tune/OS and segment swap from that to my truck/Van Os

[Tinbender59]

ask LEXTECH he has the skinny on that!

[joecar]

Find same OS with a manual trans...

open your tune as the calibration, open the MT tune as the alternate, go Edit->Copy Entire Segment and choose Transmission segment.

Then do again for Transmission Diagnostics segment.


Then edit speedo parameters for MT VSS reluctor tooth count.


Then save file, and do full flash.

[Tinbender59]

that is easy enough

[joecar]

This is the hard part:

Find same OS with a manual trans...

...

and then you very most likely want/need all the peripheral switches/sensors like the CPP switch and the VSS sensor/reluctor.