Results 1 to 8 of 8

Thread: $0351 error

  1. #1
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default $0351 error

    Trying to flask my tunes from ridgerunner and now getting errors. They sent me a BBX file which had stock ctz file and 5 coz files. I saved them to my SD card and full flashed the stock ctz file no problem but now i go to cal flash to use to coz files and my BBF gives me controller mismatch error.

  2. #2
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Quote Originally Posted by pavetim View Post
    Trying to flask my tunes from ridgerunner and now getting errors. They sent me a BBX file which had stock ctz file and 5 coz files. I saved them to my SD card and full flashed the stock ctz file no problem but now i go to cal flash to use to coz files and my BBF gives me controller mismatch error.
    $0531 is the controller mis-match error - I assume this is the error you have, not $0351? If that is the case, Ridgerunner has restricted the security of those tune files to match a specific controller serial number and the serial number of your controller does not match. You'll need to contact Ridgerunner for compatible tunes.

    Given you can flash one of the tunes provided, if you open the BBX setup in the [F5: BBX] -> [F6: Quick Setup] screen, you'll be able to see the controller serial number security allocated to all of those tune files. Either the file you flashed doesn't have controller serial security, or it's different to the tune file that fails flashing.

    Cheers
    Cindy

  3. #3
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    I recertified my V2 and ecm serial numbers are correct in the ctz file, I cannot look in the coz file. I'll double check the code but it did say controller mismatch
    Last edited by pavetim; October 9th, 2016 at 10:53 AM.

  4. #4
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    I don't know what i am doing wrong but i open F5 BBX and nothing there but if i open the tune and use controller information tab the numbers are indeed wrong.

  5. #5
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Quote Originally Posted by pavetim View Post
    I don't know what i am doing wrong but i open F5 BBX and nothing there but if i open the tune and use controller information tab the numbers are indeed wrong.
    You can't open *.coz files, you can only open *.ctz files.
    You can look at *coz file tune security by adding the tune files to the Quick Setup. Navigate to [F5: BBX] -> [F6: Quick Setup], using the green plus on the RHS, add the *coz tune files that they sent you.

    In any case, you'll need to have Ridgerunner send you tunes where the controller serial permission matches your actual controller serial.

    Cheers
    Cindy

  6. #6
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    I emailed them i noticed there is a 0 in front of my ECM serial number but my flashscan when i pull it up doesnt have a 0. Strange cause the ctz files i have have only a 0 for ecm serial number and that one flashed
    Last edited by pavetim; October 9th, 2016 at 12:54 PM.

  7. #7
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Quote Originally Posted by pavetim View Post
    I emailed them i noticed there is a 0 in front of my ECM serial number but my flashscan when i pull it up doesnt have a 0. Strange cause the ctz files i have have only a 0 for ecm serial number and that one flashed
    Where Controller Serial Security is populated with a "0" the security field is not active.

    Cheers
    Cindy

  8. #8
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    Ok makes sense then, so if they accidentally put a 0 in the beginning of my serial number that is probably what's kicking out the error

Similar Threads

  1. Replies: 8
    Last Post: March 20th, 2018, 05:47 AM
  2. ERROR. Please help
    By ntrimm in forum FlashScan V2
    Replies: 1
    Last Post: March 29th, 2009, 02:22 PM
  3. Error
    By ASSAMI in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: February 4th, 2007, 08:27 AM
  4. Com Error
    By Neilb in forum EFILive V4
    Replies: 0
    Last Post: January 6th, 2006, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •