Page 5 of 5 FirstFirst ... 345
Results 41 to 48 of 48

Thread: Question about hooking up AEM gauge output to V2

  1. #41
    Lifetime Member
    Join Date
    Aug 2007
    Posts
    222

    Default

    https://forum.efilive.com/showthread...ial&highlight=

    Here is the thread where I got help setting it up originally.

    PN 30-4900
    00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.

  2. #42
    Lifetime Member
    Join Date
    Aug 2007
    Posts
    222

    Default

    I just downloaded the efilive program to my wifes laptop and used that old calc_pids txt . after idling for a bit the volts went to 6.19volts and I verified with my meter its only getting 4.47. I think my AD1 and AD4 are on their way out. I sent it to socal diesel but they said it checks out fine.
    00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.

  3. #43
    Lifetime Member
    Join Date
    Aug 2007
    Posts
    222

    Default

    00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.

  4. #44
    Lifetime Member
    Join Date
    Aug 2007
    Posts
    222

    Default

    Joecar, what I am saying is if you build me a calc_pids txt for me, lets use AD2 or AD3 please.
    00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.

  5. #45
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Slowrc View Post
    Joecar, what I am saying is if you build me a calc_pids txt for me, lets use AD2 or AD3 please.
    Ok, I'll edit it to use AD2, see attached...

    select the following pids:
    - EXT.AD2
    - GM.EQIVRATIO
    - CALC.WIDEBAND

    and then check that the pid CALC.WIDEBAND is completely valid (do rightclick->More Info on it, all the units for it should be valid)... post some logs with these pids.

    and then in the charts/gauges use the following pids:
    - CALC.WIDEBAND.BEN (use for correction maps)
    - CALC.WIDEBAND.LAM
    - CALC.WIDEBAND.EQR
    - CALC.WIDEBAND.E00 (use for viewing gasoline E0-based AFR)
    - CALC.WIDEBAND.E10 (use for viewing gasoline E10-based AFR)
    - CALC.WIDEBAND.E85 (use for viewing gasoline E85-based AFR)



    Also note that I left the pid CALC.WO2BEN intact... it is mathematically identical to CALC.WIDEBAND.BEN... you can use either.
    Attached Files Attached Files
    Last edited by joecar; November 2nd, 2016 at 12:47 PM.

  6. #46
    Lifetime Member
    Join Date
    Aug 2007
    Posts
    222

    Default

    Thanks!!! I will try these out tomorrow morning.
    00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.

  7. #47
    Lifetime Member
    Join Date
    Aug 2007
    Posts
    222

    Default

    Quote Originally Posted by joecar View Post
    Ok, I'll edit it to use AD2, see attached...

    select the following pids:
    - EXT.AD2
    - GM.EQIVRATIO
    - CALC.WIDEBAND

    and then check that the pid CALC.WIDEBAND is completely valid (do rightclick->More Info on it, all the units for it should be valid)... post some logs with these pids.

    and then in the charts/gauges use the following pids:
    - CALC.WIDEBAND.BEN (use for correction maps)
    - CALC.WIDEBAND.LAM
    - CALC.WIDEBAND.EQR
    - CALC.WIDEBAND.E00 (use for viewing gasoline E0-based AFR)
    - CALC.WIDEBAND.E10 (use for viewing gasoline E10-based AFR)
    - CALC.WIDEBAND.E85 (use for viewing gasoline E85-based AFR)



    Also note that I left the pid CALC.WO2BEN intact... it is mathematically identical to CALC.WIDEBAND.BEN... you can use either.

    That worked beautifully!!! I will post some logs when I get back home to wifi. THANKS AGAIN JOE!!!
    00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.

  8. #48
    Lifetime Member
    Join Date
    Aug 2007
    Posts
    222

    Default log

    Here is a short ride to work. The wideband is very close to the gauge now. I will work on it more when my new meth pump arrives. thanks again Joe!
    Attached Files Attached Files
    00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.

Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge
    By Gelf VXR in forum General (Petrol, Gas, Ethanol)
    Replies: 206
    Last Post: July 24th, 2017, 07:58 AM
  2. Aem failsafe gauge not serial
    By Slowrc in forum General
    Replies: 25
    Last Post: August 12th, 2014, 11:23 AM
  3. Question on Hooking LC1 up on 02 Camaro
    By gpr in forum Gen III V8 Specific
    Replies: 6
    Last Post: July 10th, 2012, 07:33 AM
  4. 98 to 99 Fuel Segment swap gauge output table
    By AutomagicLS1 in forum Gen III V8 Specific
    Replies: 3
    Last Post: September 27th, 2011, 09:29 AM
  5. AEM Gauge type 6 in 1 WB UEGO controller
    By JET LEE in forum Gen III V8 Specific
    Replies: 10
    Last Post: January 25th, 2007, 08:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •