Results 1 to 3 of 3

Thread: How to Alter Coast down Speed and RPM Drop.

  1. #1
    Senior Member
    Join Date
    May 2015
    Posts
    172

    Default How to Alter Coast down Speed and RPM Drop.

    Have tuned a M6 L76 and the customer has brought up that when coming to a stop and when you coast down that it feels like the revs hang slightly before fully dropping causing it to continue pulling rather then slowing. Now what tables am I looking at here E38 PCM. Coast Downs Spark B5122 or more the correction tables B5123 & B5124 or am I looking more at the idle tables B1829 in the areas where it feels the worst? I'm sure I read somewhere a table to modify but cant find the thread again.

    Appreciate any help.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You might have to look at the Throttle Follower tables.

  3. #3
    Senior Member
    Join Date
    May 2015
    Posts
    172

    Default

    The B1859 table? Just decrease around the RPMs where he notices it most?

Similar Threads

  1. RPM drop when step on brake in P/N
    By DrX in forum Gen III V8 Specific
    Replies: 8
    Last Post: May 3rd, 2014, 02:07 AM
  2. 2800 RPM Fuel Drop-Off
    By 68showngo in forum Cummins 5.9L
    Replies: 75
    Last Post: August 20th, 2011, 05:26 AM
  3. Slow engine rpm drop after rew
    By Ram Air IV in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: April 9th, 2011, 06:54 AM
  4. Throttle blip...why is RPM slow to drop?
    By KAZ MotorSports in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: August 2nd, 2007, 08:28 AM
  5. RPM drop with TCC lockup?
    By DrX in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 3
    Last Post: April 7th, 2006, 02:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •