Results 1 to 10 of 10

Thread: Logging issue

  1. #1
    New Member
    Join Date
    Aug 2015
    Posts
    8

    Default Logging issue

    My v2 up and decided it doesnt wanna data log some of the pid's, i cant data log a cmd, or cmd at all or the eda's on a cmb but can log balance rates, im runnind v82.2.303 and my v2 is up to date. Any thoughts?? Thanks

  2. #2
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    I assume these are PID's that you were previously able to log? Have you confirmed your BBX setup to confirm that the PID's are loaded in the V2 BBX config file?
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  3. #3
    New Member
    Join Date
    Aug 2015
    Posts
    8

    Default

    Yup, the set up properly and could always log them before

  4. #4
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    Is this the same vehicle(s) as before? Does the truck have a CSP5 tune loaded? Unless a CSP5 upgraded OS is loaded then you will be limited to what you can data log.
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  5. #5
    New Member
    Join Date
    Aug 2015
    Posts
    8

    Default

    Yup same vehicles as always.


    Sent from my iPhone using Tapatalk

  6. #6
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    Yea, that is odd.
    Maybe something happened to the file on the V2. I'd try to rebuild and then reload your BBX setup config to your V2 or just reload your BBX setup that you currently have on your PC.
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  7. #7
    New Member
    Join Date
    Aug 2015
    Posts
    8

    Default

    very odd, and did that a couple times

  8. #8
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    I'm all out of troubleshooting and possible solutions then, sorry.


    Hopefully someone else will chime in here.
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  9. #9
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by PHIL@ARMORINC View Post
    My v2 up and decided it doesnt wanna data log some of the pid's, i cant data log a cmd, or cmd at all or the eda's on a cmb but can log balance rates, im runnind v82.2.303 and my v2 is up to date. Any thoughts?? Thanks
    When you say "can't log" what error do you see? (if any error at all).

    Regards
    Paul
    Before asking for help, please read this.

  10. #10
    New Member
    Join Date
    Aug 2015
    Posts
    8

    Default

    No error code. Just reads 0's. Except for rpm's


    Sent from my iPhone using Tapatalk

Similar Threads

  1. Data Logging Issue
    By tdsabo in forum Cummins 5.9L
    Replies: 1
    Last Post: March 31st, 2016, 02:38 PM
  2. Custom Dashboard Logging Issue
    By PHLTHS in forum Black Box Logging
    Replies: 4
    Last Post: November 9th, 2015, 09:22 AM
  3. LM-1 logging/map issue
    By playtoy_18 in forum External A/D inputs
    Replies: 3
    Last Post: January 17th, 2014, 08:04 AM
  4. PSL Logging issue
    By Cougar281 in forum FlashScan V2 BB Logging
    Replies: 6
    Last Post: April 28th, 2008, 11:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •