Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: PCM driven shift light on an auto

  1. #1
    Junior Member
    Join Date
    Oct 2007
    Posts
    48

    Default PCM driven shift light on an auto

    I am using 01290005 operating system and trying to use the air pump output pin red plug pin 36 to drive a shift light at a programmed RPM.
    Activated air pump in the platform and adjusted the setting in the Air pump parameters did not work.

    While I am running 01290005 operating system which was converted from an Australian operating system is it possible the Australian operating system/tune does not have the relevant information to drive the air pump output!
    Can anyone offer any suggestions?

    Thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Look at G1206/G1207.

  3. #3
    Junior Member
    Join Date
    Oct 2007
    Posts
    48

    Default

    Quote Originally Posted by joecar View Post
    Look at G1206/G1207.
    Thanks for the reply I have already set G1206/G1207
    Also
    B0201
    B0202
    B0203
    B0204
    B0205
    B0206
    B0207
    have been addressed.

  4. #4
    Lifetime Member
    Join Date
    Mar 2007
    Posts
    349

    Default

    Do you have to turn on the DTC's to get it to function? C6001 ---> P0410, P0412, P0418? Set them to something like Non Emissions

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by turbo_bu View Post
    Do you have to turn on the DTC's to get it to function? C6001 ---> P0410, P0412, P0418? Set them to something like Non Emissions
    I'm not sure...

    ( I know disabling the DTC's prevents the Secondary AIR tests from running )


    it might be best to try it and see.

  6. #6
    Junior Member
    Join Date
    Oct 2007
    Posts
    48

    Default

    Quote Originally Posted by turbo_bu View Post
    Do you have to turn on the DTC's to get it to function? C6001 ---> P0410, P0412, P0418? Set them to something like Non Emissions
    Interesting!.....I will try it and report back thanks.

  7. #7
    Lifetime Member
    Join Date
    Mar 2007
    Posts
    349

    Default

    Quote Originally Posted by joecar View Post
    I'm not sure...

    ( I know disabling the DTC's prevents the Secondary AIR tests from running )


    it might be best to try it and see.
    I guess I meant to say just turn on the sensor, and maybe not the actual Secondary AIR test DTC. Either way, I think that you have to tell the PCM that something is there before it will turn it on.

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by turbo_bu View Post
    I guess I meant to say just turn on the sensor, and maybe not the actual Secondary AIR test DTC. Either way, I think that you have to tell the PCM that something is there before it will turn it on.
    Yes, I agree, PCM has to be told to look for it.

  9. #9
    New Member
    Join Date
    Jul 2015
    Posts
    5

    Default

    Im also interested in this im using a auto trans os but a th400 tried shift light output with a led and it blinks untill set rpm then goes solid i would love to a different output to make this work

  10. #10
    Junior Member
    Join Date
    Oct 2007
    Posts
    48

    Default

    Quote Originally Posted by turbo_bu View Post
    Do you have to turn on the DTC's to get it to function? C6001 ---> P0410, P0412, P0418? Set them to something like Non Emissions
    Tried all the settings this did not work either!

Page 1 of 2 12 LastLast

Similar Threads

  1. E40 PCM shift light output? And fan
    By bikealarmblair in forum Gen IV V8 Specific
    Replies: 6
    Last Post: June 27th, 2012, 07:06 AM
  2. E40 PCM shift light output? And fan
    By bikealarmblair in forum Gen III V8 Specific
    Replies: 1
    Last Post: June 27th, 2012, 02:14 AM
  3. Can the 1-4 shift light be controlled on the e38s like the 0411 PCM?
    By Highlander in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: March 10th, 2011, 12:33 PM
  4. Using the pcm controlled shift light
    By Chris81 in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: December 4th, 2008, 04:56 AM
  5. shift light
    By RUTAN TA in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: July 17th, 2006, 05:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •