Results 1 to 7 of 7

Thread: CAX Still working for ALL OS?

  1. #1
    Junior Member
    Join Date
    Nov 2014
    Posts
    12

    Default CAX Still working for ALL OS?

    Below is what I'm attempting to get to show up in the Cal "32140305". I pasted the file into the calibration folder and even in the sub folder "CME". I have enabled CAX files in my properties as well.

    I can't get ANYTHING from the CAX to show up when I open the tune. This is one of my first miserable attempts at this.


    [E9801]
    DESC.001 = Used to enable or disable hardware.
    Desc.002 =
    Desc.003 = NOTE: This could really tear stuff up
    VIEW = 1 "Fitted With Module" "Vehicle Options" "Test Name" 1 1 0 0
    ADDR = 00D57D 0 16 SED 0
    SI_SLOT = e/d 1 0 0 0 1 0 1
    ULABELS = . . .
    SI_ENUM = "1=Enable,0=Disable"
    IM_ENUM = .
    SI_COL = .
    SI_ROW = .
    ; ================================================== =============================

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by SmokeAintPower View Post
    Below is what I'm attempting to get to show up in the Cal "32140305". I pasted the file into the calibration folder and even in the sub folder "CME". I have enabled CAX files in my properties as well.

    I can't get ANYTHING from the CAX to show up when I open the tune. This is one of my first miserable attempts at this.
    That E9801 shows up when I test it here.
    Is it possible that your filename is actually set to 32140305.cax.txt. You would not see the .txt on the end of the filename if Windows Explorer is set to "Hide extensions for known file types".

    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Junior Member
    Join Date
    Nov 2014
    Posts
    12

    Default

    Quote Originally Posted by Blacky View Post
    That E9801 shows up when I test it here.
    Is it possible that your filename is actually set to 32140305.cax.txt. You would not see the .txt on the end of the filename if Windows Explorer is set to "Hide extensions for known file types".

    Regards
    Paul
    I have extensions set to visible. It's labeled as 32140305.cax and placed into the directory C:\Program Files (x86)\EFILive\V7.5\Calibrations & C:\Program Files (x86)\EFILive\V7.5\Calibrations\CME

    Could you by chance provide me with the .cax file copy you made? I'm really confused at this point.
    Last edited by SmokeAintPower; November 26th, 2016 at 03:06 PM.

  4. #4
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Did you check in the "EFILive Custom Calibrations" area?
    That's where it showed up when I tested it.

    Click image for larger version. 

Name:	sshot-6.png 
Views:	334 
Size:	14.2 KB 
ID:	20475

    Regards
    Paul
    Before asking for help, please read this.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    The table id is E9801 (from post #1), why does it show up in the A segment...?

  6. #6
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    It's defined to be in segment 1. That actual name is irrelevant.

    Code:
    [E9801]
    ;         Description
    ;         ---------------------------------------------------------------------------------------------------------------------------------
    DESC.001 = Used to enable or disable hardware.
    Desc.002 =
    Desc.003 = NOTE: This could really tear stuff up
    ;
    ;
    ;         Seg Caption                               Major                        Minor           Vis Dis 2D Grp
    ;         --- -------------------------------- ---------------------------  ----------------     --- --- -- ---
    VIEW =      1 "Fitted With Module"             "Vehicle Options"            "Test Name"            1   1  0   0
    ;
    ;         Address(es)                      BitOff Bits Typ Inv
    ;         -------------------------------- ------ ---- --- ---
    ADDR =    00D57D                                0   16 SED   0
    ;
    ;         Units           Factor         Offset Prec MinLimit MaxLimit MinUser  MaxUser
    ;         --------------- -------------- ------ ---- -------- -------- -------- --------
    SI_SLOT = e/d                          1      0    0        0        1        0        1
    ;
    ;         Body           Col            Row
    ;         -------------- -------------- --------------
    ULABELS = .              .              .
    ;
    ;         Enumerations
    ;         -------------------------------------------------------------------
    SI_ENUM = "1=Enable,0=Disable"
    IM_ENUM = .
    ;
    ;         Units            Labels
    ;         ---------------- -----------------------------------------------------
    SI_COL =  .
    IM_COL =  .
    ;
    SI_ROW =  .
    IM_ROW =  .
    Before asking for help, please read this.

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Ah, of course, I remember now. Thanks.

Similar Threads

  1. Cax Question
    By Chavez91 in forum CAX Files
    Replies: 30
    Last Post: July 13th, 2017, 05:13 AM
  2. CAX DTC's
    By DURAtotheMAX in forum CAX Files
    Replies: 6
    Last Post: April 13th, 2015, 02:10 AM
  3. loading in the .cax
    By RADustin in forum CAX Files
    Replies: 22
    Last Post: June 13th, 2014, 10:03 AM
  4. cax file?
    By myws6formula in forum CAX Files
    Replies: 1
    Last Post: December 21st, 2008, 03:00 PM
  5. .cax confusion!!!
    By Lextech in forum CAX Files
    Replies: 2
    Last Post: September 26th, 2008, 01:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •