Below is what I'm attempting to get to show up in the Cal "32140305". I pasted the file into the calibration folder and even in the sub folder "CME". I have enabled CAX files in my properties as well.

I can't get ANYTHING from the CAX to show up when I open the tune. This is one of my first miserable attempts at this.


[E9801]
DESC.001 = Used to enable or disable hardware.
Desc.002 =
Desc.003 = NOTE: This could really tear stuff up
VIEW = 1 "Fitted With Module" "Vehicle Options" "Test Name" 1 1 0 0
ADDR = 00D57D 0 16 SED 0
SI_SLOT = e/d 1 0 0 0 1 0 1
ULABELS = . . .
SI_ENUM = "1=Enable,0=Disable"
IM_ENUM = .
SI_COL = .
SI_ROW = .
; ================================================== =============================