Results 1 to 7 of 7

Thread: Requesting Help Trouble Shooting Rail Preasure - Bizarre Data Log

  1. #1
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default Requesting Help Trouble Shooting Rail Preasure - Bizarre Data Log

    I'm trying to trouble shoot a problem where on occasion the rail fuel pressure will not met requested so the truck falls on it's face trying to climb a hill or if you step on the accelerator pedal to speed up. I have replaced the FCA on the CP3 as well as the fuel filter. The truck starts fine and idles smooth. The problems seems to only happen once I've been driving an hour or more and sometimes I can make several long trips without a single problem.

    My vehicle is a 2006 Ram 2500 with 97K miles. Running on Stock setting of DSP5 tune.

    Any help is greatly appreciated!!!!!!

    This log was taken when the truck was acting up.
    I'm perplexed
    CMB_0007_Trouble.efi
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  2. #2
    Member arinkuddy's Avatar
    Join Date
    May 2014
    Posts
    79

    Default

    Looks like that is a bad log file, only 2 kB?? Could you make sure you can open it?

  3. #3
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    Yes it will open.

    Sent from my SAMSUNG-SM-N910A using Tapatalk
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  4. #4
    Member arinkuddy's Avatar
    Join Date
    May 2014
    Posts
    79

    Default

    I worded that wrong, what I meant was I can also open it but the contents aren't right. Just look at a couple of these.
    Click image for larger version. 

Name:	Capture.PNG 
Views:	208 
Size:	54.2 KB 
ID:	20484

  5. #5
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    The contents is what threw me off, hence my question. I've done well over a hundred log files in the past and never had a bad one. So you think it's just a bad (corrupt) log file, okay.

    I'll try to get a log the next time the truck exhibits the same behavior.
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  6. #6
    Member arinkuddy's Avatar
    Join Date
    May 2014
    Posts
    79

    Default

    Yeah I would try log it again if you can. Are you logging with the v2 to SD card or a laptop? Not that it matters much but jw.

    Sent from my SM-G935V using Tapatalk

  7. #7
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    Yes, SD card on my stand alone V2

    Sent from my Samsung Galaxy Note 4 via Tapatalk Pro
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

Similar Threads

  1. Can a older 4L60E with preasure manifold and 3-2 be controlled with a 2010 TCM?
    By 04colyZQ8 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 0
    Last Post: February 22nd, 2015, 07:24 AM
  2. Requesting guidance in direction of minor tune (newbie)
    By sonicgroove in forum Gen III V8 Specific
    Replies: 0
    Last Post: January 31st, 2013, 08:24 PM
  3. Trouble shooting P0200 DTC code
    By Janke in forum Gen III V8 Specific
    Replies: 7
    Last Post: September 27th, 2011, 06:48 AM
  4. efi live trouble shooting need help!!!!!
    By raycej in forum FlashScan V2
    Replies: 1
    Last Post: April 19th, 2011, 12:57 PM
  5. Log rail pressure as MPa
    By JoshH in forum Diesel
    Replies: 1
    Last Post: December 5th, 2007, 08:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •