Results 1 to 4 of 4

Thread: 8bit binary

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member
    Join Date
    Dec 2013
    Posts
    234

    Default 8bit binary

    Is it possible to show an 8bit binary value with CAX? I cannot for the life of me figure out how to show base2 binary in V7.5 with a CAX definition.

  2. #2
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,762

    Default

    you can use bit offset to do this.
    Set display to 4 too.
    "All that is needed for the triumph of evil is that good men do nothing..."

  3. #3
    Lifetime Member
    Join Date
    Dec 2013
    Posts
    234

    Default

    Quote Originally Posted by Highlander View Post
    you can use bit offset to do this.
    Set display to 4 too.
    Thanks for the reply, I actually figured that one out then subsequently, temporarily, broke EFI live and emailed Paul about it. It is being addressed in the next release.

  4. #4
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,762

    Default

    Or like this if you want to set it individually.

    Code:
    
    [M5664]
    ;         Description
    ;         ---------------------------------------------------------------------------------------------------------------------------------
    DESC.001 = If TRUE is specified for the indexed fault group, then any active fault within that group will inhibit the Misfire diagnostic.
    ;
    ;         Seg Caption                                                     Major             Minor  Vis Dis 2D Grp
    ;         --- ---------------------------------------- ---------------- ---------------- ---  ---  --  ---
    VIEW =      3 "Param"                                        "Misfire"                        ""   1     1  0   0
    ;
    ;         Address(es)                      BitOff Bits Typ Inv
    ;         -------------------------------- ------ ---- --- ---
    ADDR =   XXXXX                               1    1 SED   0
    ;
    ;         Units            Factor         Offset Prec       MinLimit       MaxLimit        MinUser        MaxUser
    ;         -------- -------------- -------------- ---- -------------- -------------- -------------- --------------
    SI_SLOT = True/False          1.0              0    0              0              1              0              1
    ;
    ;         Body           Col            Row
    ;         -------------- -------------- --------------
    ULABELS = .              .              .
    ;
    ;         Enumerations
    ;         -------------------------------------------------------------------
    SI_ENUM = "1=True,0=False"
    IM_ENUM = "1=True,0=False"
    "All that is needed for the triumph of evil is that good men do nothing..."

Similar Threads

  1. Stock binary segments
    By computerjlt in forum E47 LUZ 2.0L (Family-B) Diesel
    Replies: 3
    Last Post: August 11th, 2016, 02:48 PM
  2. Holden 2005 LS1 binary...
    By SSbaby in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 2nd, 2006, 01:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •