Results 1 to 1 of 1

Thread: 2013 Chevrolet LFX V6 in a 1966 Chevelle- alternator control help needed

  1. December 14th, 2016 #1
    67-ls1
    67-ls1 is offline
    New Member
    Join Date
    Dec 2016
    Posts
    1

    Default 2013 Chevrolet LFX V6 in a 1966 Chevelle- alternator control help needed

    I have installed a 2013 Camaro LFX V6 and a 6L50e transmission in a 1966 Chevelle. I now have it running but cannot get the alternator to charge.
    I am running the Camaro ECM (E92) but no BCM, and I believe that is where my problem lies.
    If I unplug the alternator connector, the alternator starts to charge, but I get a P0621 fault code.
    I plug it back in and the fault clears but the alternator stops charging.
    Is there a way to have the ECM control the alternator or a way to go around the ECM but not set the MIL?Thanks,
    Dennis
    Last edited by 67-ls1; December 19th, 2016 at 11:10 AM. Reason: Spelling
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Alternator control no BCM
    By l92Firebird in forum E37, E38 & E67 PFI ECM's
    Replies: 27
    Last Post: September 13th, 2023, 04:42 AM
  2. Table for Alternator Control
    By minytrker in forum E37, E38 & E67 PFI ECM's
    Replies: 13
    Last Post: March 11th, 2017, 08:04 AM
  3. Strapping the truck (and the Chevelle) back down tomorrow.
    By DoghouseDiesel in forum Cummins 5.9L
    Replies: 16
    Last Post: August 3rd, 2011, 01:51 PM
  4. Needed Traction Control Settings
    By nm2769 in forum Gen III V8 Specific
    Replies: 8
    Last Post: February 23rd, 2011, 09:54 PM
  5. Pic of my Twin turbo Chevelle you asked about.
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: October 11th, 2005, 11:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules