After a couple hours since heading down the rabbit hole, I can't think straight anymore. haha

Here's the breakdown: veh is a 1999 K2500 classic w/factory 4L80e w/pushbutton 4WD, 57k orig miles.
2011 6.0 converted to non-vvt cam
0411 pcm
96mm DBC TBody
boosted (turbo)
3-bar map (12592525)
Lingenfelter box
AEM 30-4110 WB
E-fans wired series/parallel (wanted to run camaro style 3-wire transducer for a/c, not sure if an OS supports this)

I'm sure I'm forgetting something, so ask away. PCM is from a 02 Burb1500 4x4, 12200411 hdw-09386530. The pcm is wired with the factory pins for a 4L80 with the ISS and the 4lo input for 4wd. I'm having a hard time figuring out if I can run the combo that I'm trying to with what I have. If I can get the rest to work without e-fan control, then so be it. My question is, is there a way to get DBC to work with boost, with a 4L80, with 4WD and all with this pcm?
I'm too new with this, but have to start somewhere. Customer is very meticulous and everything has to work. Any and all help is greatly appreciated. Thanks!