Results 1 to 8 of 8

Thread: pilot injection and pilot timing tables?

  1. #1
    Senior Member
    Join Date
    Apr 2014
    Posts
    169

    Default pilot injection and pilot timing tables?

    got a question on those two tables. in the process of building a motor in a customers 5.9 and going to see how much power can be squeezed out of it with cam, 6.7 head and single s467 on it with 100hp injectors and a stroker cp3. looking for some advice

  2. #2
    Member
    Join Date
    Oct 2014
    Posts
    91

    Default

    What's the question?

  3. #3
    Senior Member
    Join Date
    Apr 2014
    Posts
    169

    Default

    would u adjust them for 50-100hp injectors in a 5.9

  4. #4
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    240

    Default

    Yes, with a single S467 and the other mods you mentioned in your first post you are definitely going to need to adjust them. My assumption is that this is going to be a street driven truck.
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  5. #5
    Senior Member
    Join Date
    Apr 2014
    Posts
    169

    Default

    it is a street driven truck

  6. #6
    Member
    Join Date
    Oct 2014
    Posts
    91

    Default

    Yea definitely adjust. Both timing and duration. I like to start with a bit more pilot timing and taper it down as load and main timing go up. Keeping pilot timing higher while main is low, and vise versa. For duration it's a bit more trial and error. With big injectors you can sometimes end up with a bit of a lope when coming down to idle if you don't drop duration down, or if you drop out too much pilot duration it can get a bit noisy. A bit of trial and error.

  7. #7
    Senior Member
    Join Date
    Apr 2014
    Posts
    169

    Default

    ok I will give it a try and see how it does.

  8. #8
    Senior Member
    Join Date
    Apr 2014
    Posts
    169

    Default

    well truck runs great but the tune levels do have rattle but at a different rpm per tune level. just now adjusting the tables. so shall see if it goes away.

Similar Threads

  1. Pilot timing tables don't change in DSP files
    By THEFERMANATOR in forum Duramax LB7
    Replies: 7
    Last Post: January 24th, 2015, 08:01 AM
  2. Injection Timing / Pilot
    By Lennart in forum General (Diesel)
    Replies: 6
    Last Post: January 20th, 2012, 02:05 AM
  3. injection timing after pilot c,d?
    By SGFastMax in forum Duramax LB7
    Replies: 0
    Last Post: February 3rd, 2010, 02:35 PM
  4. Adding up pilot injection timing values
    By turbo_bu in forum General (Diesel)
    Replies: 10
    Last Post: January 28th, 2008, 03:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •