the 2011 lml tune i have been working on

[dan_verbruggen@live.com]

can i get some pointers
truck is running and driving now trying to completly delete

[dan_verbruggen@live.com]

2011 geogecods- dpf2.ctz

this is how far iv got
any input would help

[DaneF]

Might be a bit tough to get help on here since doing so is illegal

[dan_verbruggen@live.com]

truck for off road

[MatrixBDP]

Uh, it doesn't look like all that much has been done to this file compared to a stock one. Do you have a FlashScan?

[dan_verbruggen@live.com]

2011 george oct24 delet+torque.ctz

i just want to run and drive this file compaired to first will drive fine for 15 min the no throttle pedel
i have a flash scan v3
only thing other than shutting off egr throttle valve and dpf is i adjusted the torque to tps abit to 1200 from 1045 in mode 1

[MatrixBDP]

2011 george oct24 delet+torque.ctz

i just want to run and drive this file compaired to first will drive fine for 15 min the no throttle pedel
i have a flash scan v3
only thing other than shutting off egr throttle valve and dpf is i adjusted the torque to tps abit to 1200 from 1045 in mode 1

Yea, well E86A controllers are not what you should be starting on. They are very buggy. If you need help please reach out to me.

[dan_verbruggen@live.com]

i got running and driving pretty good now thanks