Results 1 to 6 of 6

Thread: Looking for stock 12644094

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Posts
    17

    Default Looking for stock 12644094

    Just need a stock tune, if you got one. Need OS 12644094

    Thanks folks

  2. #2
    Junior Member
    Join Date
    Nov 2016
    Posts
    17

    Default

    take a look there, you might find what you are looking for..

    https://www.dropbox.com/sh/uujqht8m8...eUzxLljha?dl=0
    Last edited by Red66; February 9th, 2017 at 10:17 AM.

  3. #3
    Junior Member
    Join Date
    Jan 2017
    Posts
    17

    Default

    All good thanks

  4. #4
    Junior Member
    Join Date
    Nov 2016
    Posts
    17

    Default

    You'r welcome ..

  5. #5
    New Member
    Join Date
    Nov 2012
    Posts
    6

    Default

    anyone have this 15.5 file?

    Boot Software 12657305
    Main Operating System 12667378
    Engine 12667404
    Speedometer 12667424
    System 12667419
    Fuel system 12667412
    Engine diagnostic 12666623
    Engine Operation 12666851

    or know the difference with the engine and engine diagnostic operation with this one

    Boot Software 12657305
    Main Operating System 12667378
    Engine 12667404
    Speedometer 12667424
    System 12667419
    Fuel system 12667412
    Engine diagnostic 12666622
    Engine Operation 12666850

  6. #6
    Member
    Join Date
    May 2017
    Posts
    66

    Default

    I had the same issue with a 2016 where the eng. diag and op. were 1 number shorter than what was in the ecu and it worked fine. Only thing I noticed was how the low DEF. fluid was displayed and it waited longer to throw up low fluid.

Similar Threads

  1. LML 12644094 bin
    By DURAtotheMAX in forum Duramax 2011+ LML / LGH
    Replies: 3
    Last Post: May 17th, 2016, 07:29 AM
  2. Replies: 8
    Last Post: April 20th, 2016, 10:24 PM
  3. 12644094 os
    By dtdiesel in forum Duramax 2011+ LML / LGH
    Replies: 9
    Last Post: February 8th, 2015, 03:25 AM
  4. 2006 Corvette stock tune, not so stock?
    By RecMech in forum E37, E38 & E67 PFI ECM's
    Replies: 5
    Last Post: August 25th, 2014, 06:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •