Hey what's up guys!!! So this is my 1st post on this forum. I'm Def a newbie tuner and I came over from the dark side (hp tuners). I tuned my 2000 s10 2.2 "alppha-N" truck with HP tuners but now Im ready to get my 408 Votec running and I thought EFI Live would b a better fit.

So anyway the point of my post... just need a Lil help starting up a good tune for this.

Specs on combo...

'03 lq4 block bored .030 over
4" stroke
Mamo 235cc heads
Cam specs...

Fast 36lb injectors
Mamo poted MSD intake
100mm tb
Lingenfelter 100 MAF
LS2 return less fuel rail w/vette fuel filter
D585 truck coils
-I'm running a Morose 3 vaNE vac pump (gonna monitor it through the FTP sensor thru pcm).

I'm probably forgetting something but that's the just of it.

This is all running through a t56 Magnum (close ratio).
8.5 10 bolt w/3.90 gears.

Pcm specs...
Currently '01 0288 OS from a 1500 Silverado (auto)
DBC
So far I have done...
Trans & Trans diagnostic segment swap from an '01 6 speed F body w/ 0288 OS.
I changed the Vin from the '01 Silverado to my '92 S10 which is the truck I'm using to swap it in.

Currently engine is on stand and I'm going to start it on stand to troubleshoot my wiring and anything else b4 I swap it in my truck.

I know my 1st order of business is I have to adjust my injector tables.
Then the MAF tables.
But just would like some help getting this set if possible and I'm really sorry for such a lonnnng post!!! I appreciate any info/help along the way