I have V7.5 320 and V8 2.4.314 and have updated my firmware
I have V7.5 320 and V8 2.4.314 and have updated my firmware
I installed V7.5.7 Build 309 and V8 2.4.314 and an old suitable tune and tapshift works again. Magic, I just cant ever update EFIlive again
Since loading older V7.5 309 both D9601 an D9605 have disappeared from the V7.5 build 320 so I have opened the problem file and cant find D9601 an D9605 anywhere... Confusing but problem solved. Thanks for your response Cindy. Im using Built 320 again
"Setting D9602 to ENABLED, disables SPORT SHIFT mode when trans lever is moved to the SPORT position. If you then go into manual mode, it is locked in this mode, even if trans lever is moved back to auto. You have to shift out of drive and then back in to drive to disable manual mode and revert to normal drive mode. Tested on 2011 and 2012 VE."
Came in with the previous public release
2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop
Negative timing (ATDC) doesn't show up on the V2 screen when logging the E98 controller. It got broken about 2 updates ago. I.e it's missing the - mark. (at least im pretty sure it used to)
I've re-read your post. You won't find D9601 and D9605 in V7.5.309. They were added in after that version.
Your tap-shift tune file will continue to work in both old and new software. You will need to review the other changes you made to the tune file in V7.5.320 that may have caused that to stop working.
Cheers
Cindy
Updated software is now available. Known issues should be posted in this thread https://forum.efilive.com/showthread...Public-Release
Cheers
Cindy