Quote Originally Posted by joecar View Post
B3618

when you refer to its value, look in the upper RH corner of the EFILive tunetool, does it say Lambda or EQ Ratio...?

If the value is 0.82 Lambda then you're almost safe (for SC/TC Lambda 0.78 would be safer).

If the value is 0.82 EQR then you are way too lean (PCM prevents PE commanding less than EQR 1.000).
Lambda

Quote Originally Posted by joecar View Post
NA: safe PE is lambda 0.85 (EQR 1.170).

TC/SC: safe PE is lambda 0.78 (EQR 1.28).

Safe means having sufficient fuel to avoid lean knock.

Also, you have to make sure spark advance is reduced to avoid knock.
Ah gotcha. So im running a little FAT Changed the table to .85 as you suggested.


B31616 Normal PE is currently set to 64% TPS until about 4000 RPM

Seems a little high up there to me.. Guess I should calibrate the TPS as well huh.