Results 1 to 2 of 2

Thread: 98 knock sensors

  1. #1
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default 98 knock sensors

    Im messing with a 98 vette, and its getting alot of false knock. With 100% stock tune its always getting atleast 4-9 deg at wot. I tried to tune the car but it just kept pulling the same amount of timing. Is there a way to turn down the knock sensors a little or is the only option to swap the knock sensors with newer ones along with the harness?

  2. #2
    Lifetime Member Doc's Avatar
    Join Date
    Oct 2005
    Posts
    744

    Default

    Compare (in another Tune box as the OS's will be compatitble) a later OS file. Not all the parameters are there but I think you will find some interesting differences.

    2000 Silverado Full Size 4x4: Forged 6.2, H/C F1R Procharger
    98A4 Z28: 02 PCM H/C Forged 347, 9" Moser 3.73
    V1 V2 99+up RR COS #5 OLSD Dual Stg N20
    www.efialchemy.com
    www.greatamericancarwar.com

Similar Threads

  1. No knock sensors???
    By hquick in forum General (Petrol, Gas, Ethanol)
    Replies: 14
    Last Post: July 9th, 2016, 07:28 AM
  2. Knock Sensors off
    By waterbug1999 in forum Gen III V8 Specific
    Replies: 12
    Last Post: September 12th, 2009, 03:12 PM
  3. LS2 motor with LS1 knock sensors?
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: July 9th, 2006, 05:46 PM
  4. LS1 knock sensors in C5 and LS2 block.
    By jfpilla in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 12th, 2005, 05:15 AM
  5. LS2/LS7 Knock Sensors and LS1/6 PCM
    By bink in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: June 21st, 2005, 10:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •